5-inch x 40-inch size spiral wound polyethersulfone ultrafiltration elements with 3/4" male product water tubes ("stinger style").Features of Applied Membranes Ultrafiltration PES Membranes:Tolerant to Many Solvents and OilsAbsolute Bacteria and Virus RemovalFiltration to 10,000 Molecular Weight Cut-OffLow Pressure Requirements For Reduced Operating Costs and Power ConsumptionHigh Flux for High Flow RatesRobust Materials and Construction for Long LifeDurable with good cleanability for long element lifeMade in the USAManufactured in our ISO 9001:2015 Certified Facilities100% Performance and Quality TestedBacked by our Experienced Technical Support StaffHigh Quality for Consistent and Reliable PerformanceUses the most advanced membrane film technology and manufacturing processesStandard dimensions to fit in commonly available housings M-U2540PES SpecificationsAMI Part Number:M-U2540PESMembrane Size (Nominal):2.x 40"LMolecular Weight Cut-Off (MWCO)10,000For Housing:Standard 25x40Outer Wrap:Tape WrappedMembrane Type:Polyethersulfone (PES) UltrafiltrationElement Type:Spiral WoundMaximum Operating Pressure:150 psig (10 bar) @ 77°F (25°C)Maximum Feed Flow:20 gpmMaximum Operating Temperature:140°F (60°C) at 100 psiFeed water pH Range:2-11 (continuous)Cleaning pH Range:1-13 (30 minutes)End Style:Male PWT (Stinger Style)Manufacturer:Applied Membranes, Inc.5 In.

(29.*Salt Rejection shown is from internal test data..85 cm)Membrane Length (I):10.

Calcite, a naturally occurring mineral, is self-limiting - dissolving only enough to increase the water's alkalinity to reach a non-aggressive, non-corrosive level. AMI calcite mineral cartridges are designed to fit standard filter housings for ease of compatibility .

1200 Gallon Per Day Wall Mount Ro System | 220v 60hz 1,200 GPD Commercial Wall-Mount Reverse Osmosis SystemDesigned to produce low dissolved solids water from tap or well water, these space-saving wall-mount RO systems use high efficiency reverse osmosis membranes..

x 19"LFlow Rate:100 gpd (0. Element Permeate flow may vary +/- 20%Operating Limits for M-S2519A-100Maximum Operating Temperature:113°F (45°C) Maximum Operating Pressure:1,000 psig (69 bar)Maximum Pressure Drop:15 psig (1 bar)Maximum Feed Flow Rate:6 gpm (1.

AMI H-F2020CF SpecificationsAMI Part #:H-F2020CFNominal Size:20" StandardFiltration Rating:20μ (20 Microns)Filter Diameter"2..

75" (29.

.For more information, please visit this products webpage.

AMI 30" Sediment filters can be used in any filter housing designed to accept 30" standard filter cartridges. AMI sediment filters can be used as pretreatment commercial RO systems or as a stand-alone commercial filter to protect piping and appliances from damage and buildup of dirt.5"Filter Length:30"Material:Spun PolypropyleneFor Filter Housing:30" Standard SIngle or Multi-Cartridge Filter Housings, Including:Shelco FOS3 SeriesAMI SS Filter HousingsEden EFC and EDEN EFCS seriesHarmsco BC4-3-T-EP, BC6-3-T-EP Pentek ST-3, ST-BC12Can Replace Cartridges:SDC-25-3001, SDF-25-3001, Features and Benefits of AMI Melt-Blown Polypropylene Water Filters:Graded Pore Structure for Enhanced Dirt-Holding Capacity and Extended LifeHigh Consistency Melt Blow PolypropyleneFree of Surfactants, Binders and AdhesivesProtect downstream equipment and appliancesRemoves dirt, rust, sand, grit, and other suspended solids from waterEasy and safe cartridge incineration and disposalIdeal for use as pre-treatment to an RO SystemCommon Applications for 1 Micron Melt-Blown Polyproyplene Water Filters:Whole-House FiltrationFine Sediment FiltrationCommercial FiltrationPre-Treatment for Commercial Point of Entry (POE) FiltrationCommercial RO PretreatmentMulti-Cartridge Filter HousingsLaboratoriesInstitutionsCommercialManufacturingRinse WaterWaste WaterSurface WaterSeawaterAnd a wide variety of other applications. This includes Pentek ST-3, Pentek ST-BC-12, Shelco 4FOS3, Shelco 5FOS3, Shelco 7FOS3, Shelco 12FOS3, Shelco 22FOS3, Shelco 36FOS3, , Shelco 56FOS3, C-0530-2F-316LEP, C-0530-2T-316LEP, C-0730-2F-316LEP, C-0730-2T-316LEP, C-1230-3F-316LEP, C-2230-4F-316LEP, Harmsco BC4-3-T-EP, and Harmsco BC6-3-T-EP AMI 30" Sediment filters can be used as a high quality and economical replacement for: Hydronix SDC-25-3001 and Liquitec SDF-25-3001.

Applications for Calcite Remineralization Neutralization Cartridges:Post Treatment to Home RO SystemsPoint of Use Acid NeutralizerEspresso MachinesIce MakersRefrigeratorsWashing Machines x 9.5" Dia. Calcite Filter Cartridges for Neutralizing Low pH WaterpH Neutralizer Cartridge - 100% Calcite - For 10" Standard Filter HousingAMI calcite filter cartridges are filled with 100% calcite media to naturally remineralize acidic drinking waters, raising the pH and alkalinity to a non-corrosive equilibrium.Features and Benefits of AMI Calcite Filter CartridgesBuilt-in 100 micron reticulated poly foam pre filter to prevent contamination buildup in the resin bedBuilt-in 20 micron spun-bonded polypropylene post filter to prevent media fines from being washed out of the filter cartridgeRaises pH of water to a non-corrosive equilibriumReduces Leaching of Metal Plumbing Components and Copper PipingContains 100% calcite filtration media, a naturally occurring mineralLow uniformity coefficient for maximum contactSlower Reacting for controlled pH correctionStandard Cartridge Design Fits Most Standard Residential and Commercial Filter HousingsAssembled and Quality Tested in the USA in an ISO 9001-2015 QMS Certified FacilityH-F2510CALCITE SpecificationsModel:H-F2510CALCITEBrand: AMI Media:100% CalcitePurpose:Neutralize Low pH Drinking WaterNominal Filter Size:10" Standard2.

The 2nd stage filter further filters the water, removing particles from water down to 1 micron (0.Applied Membranes Whole House-System Features and Benefits Fast and Simple DIY Installation & Worry-Free Maintenance The most worry-free way to safeguard your home's plumbing, fixtures and appliances from clogging and sediment buildup damage.

Benefits of AMI Seawater Desalination RO Membranes:Convert seawater into drinking water on yachts, boats, cruise ships, off-shore platforms, and resortsHigh Rejection & Flow Rate Made in the USA Manufactured in ISO 9001:2015 Certified Facilities 100% Performance and Quality Tested High Quality for Consistent and Reliable PerformanceUses the most advanced membrane film technology and manufacturing processesStandard dimensions to fit in commonly available housingsM-S2514A SpecificationsAMI Model NumberM-S2514ACan Replace Models:DOW SW30-2514DuPont SW30-2514FilmTec SW30-2514Industry-Standard 2..6%Minimize Salt Rejection:99.5x14 Seawater Desalination Reverse Osmosis Membranes For Watermakers and Land-and-Sea Based Seawater DesalinatorsHighest Salt Rejection Seawater RO Watermaker MembranesAMI high rejection and high productivity seawater reverse osmosis membranes are specially designed for marine applications.

Features of AMI LE Low Pressure Tap Water / Brackish Water RO MembranesReduce operating costs and wear and tear on your system by running your system at a lower pressure. With hundreds of thousands of membranes in operation in water filtration systems world-wide, AMI membranes have earned a reputation of delivering consistent, reliable, and long lasting performance, making AMI Membranes the natural choice for use in small commercial RO systems.

This protects the rest of the filtration stages and equipment from damage and clogging due to buildup of sediment. 200 Gpd Home Ro Drinking Water System | 5 Stage Ro System AMI AAA-RO-200 RO filter system produces up to 200 GPD of high quality water for your home, school or office, removing chlorine, taste and odor, and up to 99% of contaminants including Arsenic, Barium, Cadmium, Chromium (Hexavalent), Chromium (Trivalent), Copper, Turbidity, Fluoride, Lead, Radium 226/228, Selenium, and TDS.

Performance specifications based on 500 ppm tap water, 50 psi (0.75 In.Applications for AMI Home RO MembranesIn the Home for Drinking, Cooking, Pets, and PlantsOfficesAquariumsInstitutionsRestaurantsHydroponics WaterIce MakersLabsUnder the Counter/Under the Sink ROPoint of use RO SystemsPhysical Dimensions of M-T1812A100:Total Length (L):11.4 cm)Diameter (D):1.

5"x19" | 170 Gpd | Seawater Ro Membrane For Crystal Sea Watermaker | Replaces Sea Recovery 2724020333 Benefits of AMI Seawater Membranes for Crystal Sea Desalination Systems:Add AMI Membrane Quality and Value to your Existing Seawater Desalination EquipmentConvert seawater into drinking water on yachts, boats, cruise ships, off- shore platforms, and resortsHigh Rejection & Flow Rate Made in the USA Manufactured in ISO 9001:2015 Certified Facilities 100% Performance and Quality Tested High Quality for Consistent and Reliable PerformanceUses the most advanced membrane film technology and manufacturing processesStandard dimensions to fit in commonly available housingsM-SR2724020333 SpecificationsAMI Model NumberM-SR2724020333Replaces Membrane Models:Sea Recovery 2724020333CYCROM CCROMHR25/19HFFor use in System ModelsSRC 170 CS-FE / 12 VDCSRC 170 CS-FE / 24 VDCSRC-CFFESRC-CSFE-170For Use in System Series:Sea Recovery Crystal Sea SeriesFor Use in Vessel:Sea Recovery B1960900012481321000Size (Approximate):2. Element Permeate flow may vary +/- 20%Operating Limits for M-SR2724020333Maximum Operating Temperature:113°F (45°C) Maximum Operating Pressure:1,000 psig (69 bar)Maximum Pressure Drop:15 psig (1 bar)Maximum Feed Flow Rate:6 gpm (1.64 m³/d)Applied Pressure:800 psig (55 bar)Stabilized Salt Rejection:99.4m³/h) pH Range, Continuous Operation:2-11pH Range, Short-Term Cleaning:1-13Maximum Feed Silt Density Index:SDI 5Free Chlorine Tolerance:0Related Products for use with M-SR2724020333 Seawater ElementsC-C2510-A11Membrane Cleaning Cartridge with Acid Cleaner to Remove Scale Buildup and Prolong Membrane LifeC-C2510-A22Membrane Cleaning Cartridge with Alkaline Cleaner to Remove Organics and Prolong Membrane LifeC-C2510-A88Membrane Preservative Cartridge for Preserving the System and Membrane During Extended Periods of Non-Operation.

These include Axeon HF1-4014 and HF6-4014.High Rejection & Flow RateMade in the USAManufactured in our ISO 9001:2015 Certified Facilities100% Performance and Quality TestedBacked by our Experienced Technical Support StaffHigh Quality for Consistent and Reliable PerformanceUses the most advanced membrane film technology and manufacturing processesStandard dimensions to fit in commonly available housingsApplications for AMI Low Pressure RO MembranesRestaurantsAquariumsWhole House (Residential)OfficeInstitutionsHotelsHospitalsDisaster ReliefSpot Free Rinse/Car WashLabsPharmaceuticalHumidificationMistingManufacturingRinse WaterBottled WaterWater storesBeverageFood ProcessingIce MakersCommercial Water TreatmentIce MakersTap WaterBrackish WaterWide Variety of Other ApplicationsPhysical Dimensions of M-T4014ALE:Total Length (L):14 In. 4" X 14" | 610 Gpd | 150 Psi | Low Energy Ro Membrane | Applied Membranes (30 cm)Diameter (D):3. This will lead to premature fouling of the membrane resulting in drop in permeate flow and higher TDS of the permeate.

68 In.High Rejection & Flow RateMade in the USAManufactured in our ISO 9001:2015 Certified Facilities100% Performance and Quality TestedBacked by our Experienced Technical Support StaffHigh Quality for Consistent and Reliable PerformanceUses the most advanced membrane film technology and manufacturing processesStandard dimensions to fit in commonly available housingsApplications for AMI Low Pressure RO MembranesRestaurantsAquariumsWhole House (Residential)OfficeInstitutionsHotelsHospitalsDisaster ReliefSpot Free Rinse/Car WashLabsPharmaceuticalHumidificationMistingManufacturingRinse WaterBottled WaterWater storesBeverageFood ProcessingIce MakersCommercial Water TreatmentIce MakersTap WaterBrackish WaterWide Variety of Other ApplicationsPhysical Dimensions of M-T2026ALE:Total Length (L):26 In. With hundreds of thousands of membranes in operation in water filtration systems world-wide, AMI membranes have earned a reputation of delivering consistent, reliable, and long lasting performance, making AMI Membranes the natural choice for use in small commercial RO systems.

3 cm)Diameter (D):1.75" (29.

The wall mountable system connects to standard USA plumbing with 1" NPT inlet and outlet.

6 MPa)Stabilized Salt Rejection:99. (96 cm)Diameter (D):3.9 In.

.500 Gallon Per Day | Wall Mount Ro System | 110v 60hz 500 GPD Commercial Wall-Mount Reverse Osmosis SystemDesigned to produce low dissolved solids water from tap or well water, these space-saving wall-mount RO systems use high efficiency reverse osmosis membranes.

Filter Holder For Sdi-2000 Kit.

AMI calcite mineral cartridges are designed to fit standard filter housings for ease of compatibility - H-F2520CALCITE is 20" length and fits inside of a 20" Standard filter housings (actual outside dimensions of these housings are approximately 4.

4m³/h) pH Range, Continuous Operation:2-11pH Range, Short-Term Cleaning:1-13Maximum Feed Silt Density Index:SDI 5Fere Clorine Tolerance:0Related Products for use with M-S2521A Seawater ElementsPRO-2.

AMI Membranes are Made in the USA in their ISO 9001:2015 Certified Facility and are 100% Quality and Performance Tested.655139-03Oil Absorbing Filter Cartridge - Oil-Water Separator Replacement Cartridge, 20" Big Blue Pentair Pentek FilterH-F10100CFPlankton Filter - 10" Standard 100 Micron Spun Polypropy x 38"LFlow Rate:550 gpd (2081 lpd)Applied Pressure:800 psig (55 bar)Stabilized Salt Rejection:99.6%Minimize Salt Rejection:99. Element Permeate flow may vary +/- 20%Operating Limits for M-S2538AMaximum Operating Temperature:113°F (45°C) Maximum Operating Pressure:1,000 psig (69 bar)Maximum Pressure Drop:15 psig (1 bar)Maximum Feed Flow Rate:6 gpm (1.

M-T1812A50 is certified to NSF/ANSI 58 for the reduction of Arsenic, Barium, Cadmium, Chromium (Hexavalent), Chromium (Trivalent), Copper, Turbidity, Fluoride, Lead, Radium 226/228, Selenium, and TDS.Aqua Flow - E50TFC-2, E50TFC-3Axeon - 255-TF-050, TFC, 200359, TF-1812-50Crystal Quest - TFC CQE-RC-04041, TFC/TFMCulligan - TFM-50-A, 00-4015-33, 00401533, 01-0060-98, 4015-33, M-T1812AC50, AC-50, LC-50, 21582, 1224437, AG2012TJFDesal Membranes - TFM-50, 1204694, 1224437, AG2012TJFDuPont DOW FilmTec - TW30-1812-50, TW30-1812-50HRFlow Matic - FMR04J, FMR05GHague - 200295, 200290Honeywell - RF-63, 01-0060-98Intellipure - TF-1812-50, 210206GE Osmonics - TFM-50, 1204694, 4073660, M-T1812A50, T112N-50, GE-RO-TFM-50, 1224437, 21582Osmotik - T112-50Pentair - TLC-50, 555694-00, 1204694Purwater - TFM50EMTGI Pure TopWay Global - MM-TFF45/75Valuetrex - VX-TW30-50DWaterAnywhere - 1812-50-ROWaterFilters. Element permeate flow may vary ± 15%. If your model is not listed, check the Membrane Dimensions drawing below against the dimensions of the element you are replacing, or contact us for assistance.

In & Out Pressure Gauges Take the guesswork out of maintenance and let you know when it is time to change the filters.

(6.

This filter is 4.5" OD. The more details you can provide, the faster we will will be able to help you!Photos are especially helpful!.