4x40 , 1950 Gpd , 99.6% Salt Rejection , Seawater Ro Membrane , Applied Membranes
About The 655139-03Oil Absorbing Filter Cartridge - Oil-Water Separator Replacement Cartridge, 20" Big Blue Pentair Pentek FilterH-F10100CFPlankton Filter - 10" Standard 100 Micron Spun Polypropylene Replacement Filter CartridgeCommon Applications for AMI Seawater Watermaker Elements:. AMI SWRO membranes are ideal for seawater desalination in shipboard applications, watermakers, land-based desalinators and sea-based desalinators.38 m³/d)Applied Pressure:800 psig (55 bar)Stabilized Salt Rejection:99.Looking for a replacement seawater desalination membrane element for your watermaker filter system? View our Watermaker Replacement Membrane Chart
x 40"LFlow Rate:1950 gpd (7.38 m³/d)Applied Pressure:800 psig (55 bar)Stabilized Salt Rejection:99.6%Minimize Salt Rejection:99.4%Single Element Recovery:8%Exterior:Hard Shell FiberglassMembrane Type:Polyamide Thin-FilmCompositeFor Use in Systems:Watermakers or marine systems using 4x40 SWRO MembranesKatadyn Spectra Systems:Spectra Farallon 1800c,Spectra Farallon 2800c,Spectra LB 1800,Spectra LB 4000 Permeate flow and salt rejection based on 32,000 ppm NaCl feed stream, pressure and recovery listed above. View our Watermaker Replacement Membrane Chart. Benefits of AMI Seawater Desalination RO Membranes:Convert seawater into drinking water on yachts, boats, cruise ships, off-shore platforms, and resortsHigh Rejection & Flow RateMade in the USAManufactured in ISO 9001:2015 Certified Facilities100% Performance and Quality TestedHigh Quality for Consistent and Reliable PerformanceUses the most advanced membrane film technology and manufacturing processesStandard dimensions to fit in commonly available housingsM-S4040A SpecificationsAMI Model NumberM-S4040ACan Replace Models:DOW SW30-4040,DuPont SW30-4040,FilmTec SW30-4040,Spectra FT-MB-SW4x40,Koch 1820SSIndustry-Standard 4x40 Size Seawater RO ElementsSize (Approximate):4" Dia. AMI Membranes are Made in the USA in their ISO 9001:2015 Certified Facility and are 100% Quality and Performance Tested.Looking for a replacement seawater desalination membrane element for your watermaker filter system? AMI 4x40 Seawater Desalination Reverse Osmosis MembranesFor Watermakers and Land-and-Sea Based Seawater DesalinatorsHighest Salt Rejection Seawater RO Watermaker MembranesAMI high rejection and high productivity seawater reverse osmosis membranes are specially designed for marine applications. Element Permeate flow may vary +/- 20%M-S4040A Operating LimitsMaximum Operating Temperature:113°F (45°C) Maximum Operating Pressure:1,000 psig (69 bar)Maximum Pressure Drop:15 psig (1 bar)Maximum Feed Flow Rate:16 gpm (3.6m³/h) pH Range, Continuous Operation:2-11pH Range, Short-Term Cleaning:1-13Maximum Feed Silt Density Index:SDI 5Fere Clorine Tolerance:0 Related Products for use with M-S4040A Seawater Elements40E100-14x40 Fiberglass Membrane Housing for Seawater RO Membranes (Water Maker Pressure Vessel)C-C2510-A11Membrane Cleaning Cartridge with Acid Cleaner to Remove Scale Buildup and Prolong Membrane LifeC-C2510-A22Membrane Cleaning Cartridge with Alkaline Cleaner to Remove Organics and Prolong Membrane LifeC-C2510-A88Membrane Preservative Cartridge for Preserving the System and Membrane During Extended Periods of Non-Operation.655139-03Oil Absorbing Filter Cartridge - Oil-Water Separator Replacement Cartridge, 20" Big Blue Pentair Pentek FilterH-F10100CFPlankton Filter - 10" Standard 100 Micron Spun Polypropylene Replacement Filter CartridgeCommon Applications for AMI Seawater Watermaker Elements: AMI SWRO membranes are ideal for seawater desalination in shipboard applications, watermakers, land-based desalinators and sea-based desalinators.
469
4x40 , 1950 Gpd , 99.6% Salt Rejection , Seawater Ro Membrane , Applied Membranes
469
Specifications of 4x40 , 1950 Gpd , 99.6% Salt Rejection , Seawater Ro Membrane , Applied Membranes | |
|---|---|
| Category | Health & Beauty |
| Instock | instock |
