Stage 1 sediment filter removes dirt, rust, sand, dust, and other particles from the water down to 5 microns - protecting your plumbing & appliances and priming the water for the later stage filters.

AMI extra-low energy brackish water RO membrane elements produce high quality water from tap or brackish water sources in commercial RO systems, and are among the finest in the industry.6 cm)Membrane Length (I):38 In. AMI Membranes are Made in the USA in their ISO 9001:2015 Certified Facility and are 100% Quality and Performance Tested.

.0-60 psi pressure gauges are also used to measure incoming pressure for Silt Density Index Testing, such as AMI Direct SDI Silt Density Index Test Kit.

Commonly used in on-board Watermakers to create drinking water from seawater for yachts, boats, and cruise ships, DOW FILMTEC marine SWRO elements offer the highest productivity while maintaining excellent salt rejection. 2.

Our certified water treatment experts will be happy to discuss your application.Specifications for M-T2514AAMI Part Number:M-T2514AMembrane Size (Nominal):2.6 MPa) applied pressure, 77ºF (25ºC) feed water temperature, pH 8 and the recovery listed in the table above.

             Specifications for TW30 PRO-2540    FilmTec Product: TW30 PRO-2540 FilmTec Part Number:12081019 Replaces Products: TW30-2540, 80643Size (Nominal):2. 2..

 Contaminants RemovedChemical Contaminants Removed: Bad Tastes & Odors, Chlorine, Chlorine By-Products, Chloramine, Pesticides, Herbicides, Insecticides, Industrial Solvents, Volatile Organic Chemicals (VOCs)Sediment Contaminants Removed: Sediment, Dirt, Rust, Sand, Silt, and other suspended solids which can cause build-up and clogging.

.1200 Gallon Per Day Wall Mount Ro System | 110v 60hz 1,200 GPD Commercial Wall-Mount Reverse Osmosis SystemDesigned to produce low dissolved solids water from tap or well water, these space-saving wall-mount RO systems use high efficiency reverse osmosis membranes.

.

Next the water passes through Applied Membrane's advanced Ultra-High Performance Lead carbon filter which absorbs bad tastes and odors while removing undissolved lead, cysts, chlorine, chloramine as well as 100s of other chemical contaminants commonly found in tap water.

Excellent chemical contaminant reduction.

Service life:1,500 Gallons (or 1 year maximum)Sediment Filtration:5 Micron Nominal RatingIn/Out Connections:1/4" Female Threaded (Straight)Uses: Icemakers, refrigerators, under-the-counter, drinking fountains, beverage equipment, R. In.O.

. For the past 40 years, AMI Membrane elements have earned the reputation of consistent quality. x 13"LExterior:Hard Shell FiberglassMembrane Type:Polyamide Thin-FilmComposite*Katadyn PowerSurvivor 80E requires 2 elements.

10" Big Blue 5m Sediment Filter Pleated.

x 38" LFlow Rate:2,750 GPD (12,501 LPD)Applied Pressure:100 psi (0. 4" x 38" Extra-Low Energy Reverse Osmosis Membrane | Tap or Brackish Water | 2,750 GPD at 100psi4x38 RO Membrane for Reverse Osmosis Water Treatment Systems | Small Commercial, Agriculture, Hydroponics, Medical, and more.8 In.

.1700 Gallon Per Day | Wall Mount Ro System | 220v 60hz 1,700 GPD Commercial Wall-Mount Reverse Osmosis SystemDesigned to produce low dissolved solids water from tap or well water, these space-saving wall-mount RO systems use high efficiency reverse osmosis membranes.

(4.

AMI H-F3010CF SpecificationsAMI Part #:H-F3010CFNominal Size:30" StandardFiltration Rating:10μ (10 Microns)Filter Diameter"2.

.1000 Gallon Per Day | Wall Mount Ro System | 110v 60hz 1,000 GPD Commercial Wall-Mount Reverse Osmosis SystemDesigned to produce low dissolved solids water from tap or well water, these space-saving wall-mount RO systems use high efficiency reverse osmosis membranes.

3-0.5x40 membrane housing pressure vessels and can be used as direct replacement for many industry-standard 25x40 size CTA RO elements with 3/4" male product water tubes ("stinger style").9 bar)Maximum Feed Flow:6 gpmMinimum Brine to Feed Flow Ratio:5:1End Style:Male PWT (Stinger Style)Manufacturer:Applied Membranes, Inc.

2.Country of Manufacture:United States (USA)Applications for Nanofiltration Membrane Elements:Fuel Oil/Water SeparationsGray WaterBlack WaterPaper Wastewater TreatmentPulp Wastewater TreatmentLignin Wastewater CleanupTextile Wastewater CleanupApplications Requiring Tolerances to Many Solvents and OilsPhysical Dimensions of M-U2540PAN:Total Length (L):40 In.

6" x 4"Power:14 WattsLamp:8 WattsMax Current:1 ampElectrical:90-265v/50-60HzPower Cord:Standard N.3"LController Dimensions:6.The solution? Designed for easy, do-it-yourself installation, Applied Membranes Helios Series 2 GPM systems are perfect for installation on a point of use tap or faucet (ideal for under-sink installation).

19 (30)C0.Common Applications for FilmTec NF270-2540 Nanofiltration Elements:Production of Municipal Drinking WaterDemineralization in Small Commercial ApplicationsRelated Products for use with NF270-2540PV2540PVCAUPVC Membrane Housing Pressure Vessel for 2.DOW FILMTEC NF270-2540 is FDA – 21 CFR 177.

1. Specifications for M-T1812A5 AMI Model Number: M-T1812A5 Flow Rate: 36 GPD (136 LPD) Size (Approximate): 1.8" Dia.

5 x 21Membrane Dimensions:2. 2.Specifications for M-T2521AHFAMI Part Number:M-T2521AHFMembrane Size (Nominal):2.

5" Dia.6%Minimize Salt Rejection:99. 2.

Operating Pressure:125 psi (8.Specially designed and tested high output lamps provide consistent and reliable ultraviolet output over the entire life of the lamp (9000 hours) to ensure continuous purification, and offer superior performance in a wide range of water conditions.

75 In. 2.

75 In. This will lead to premature fouling of the membrane resulting in drop in permeate flow and higher TDS of the permeate.

5" Dia.