These include:DuPont DOW FilmTec BW30LE-4040, 80604DuPont DOW FilmTec LC LE-4040, 356603, 356602GE Desal AK4040FM, 120813, AK4040FFCSM RE4040-FLIf you do not see your membrane listed or wish to learn more about compatibility, please contact us. AMI Commercial LE Brackish Water Reverse Osmosis Membranes are constructed of tap water TFC (thin film composite) membrane material and fit standard PVC and Stainless Steel RO Membrane Housings. (1.9 cmm)Replacement Compatibility for AMI 4 X 40 LE RO MEMBRANESApplied Membranes M-T4040ALE low energy membrane elements can be used as direct replacement for many industry-standard 4x40 size low pressure RO elements with 3/4" male product water tubes ("stinger style") which are rated at 225psi. 4" x 40" Low Energy Brackish Water RO Membrane , Fiberglasssed Shell , 2900 GPD BWRO LEAMI Low Energy (Low Pressure) RO Membrane elements are specially designed to run at 150 psi while producing the same product flow as standard elements. AMI Membranes are Made in the USA in their ISO 9001:2015 Certified Facility and are 100% Quality and Performance Tested.M-B4040ALE SpecificationsAMI Part Number:M-B4040ALEMembrane Size (Nominal):4 x 40Membrane Dimensions:3.9"Dia. (96 cm)Diameter (D):3.9 In. Our certified water treatment experts will be happy to discuss your application. By using these elements in your commercial reverse osmosis system, you can significantly reduce your operating costs in tap water applications. AM LE BWRO elements are wrapped in a hard shell of FRP for added strength and to withstand higher pressure drops. x 40"LFlow Rate:2,900 GPD (10,976 LPD)Applied Pressure:150 psi (1 MPa)Stabilized Salt Rejection:99%Outer Wrap:Fiberglassed ShellMembrane Type:Tap or Brackish WaterMembrane Sheet:TFC (Thin Film Composite)Element Type:Spiral WoundFor Housing:Standard 4" x 40"Feed Water Test Temperature:77°F (25°C)Single Element Recovery:15%Chlorine Tolerance:0Feed water pH Range:2-11Manufacturer:Applied Membranes, Inc.Country of Manufacture:United States (USA)Can Replace:DuPont DOW FilmTec BW30LE-4040, LC LE-4040GE Desal AK4040FMCSM RE4040-FLNote: Performance specifications based on 2,000 mg/l sodium chloride, 150 psi (1 MPa) applied pressure, 77ºF (25ºC) feed water temperature, pH 8 and the recovery listed in the table above. (101.6 cm)Membrane Length (I):38 In. Element permeate flow may vary ± 20%.Features of AMI Brackish Water RO MembranesReduce operating costs and wear and tear on your system by running your system at a lower pressure.High Rejection & Flow RateHard fiberglass exterior provides added strength and withstands higher pressure drops than tape-wrapped elements.Made in the USAManufactured in our ISO 9001:2015 Certified Facilities100% Performance and Quality TestedBacked by our Experienced Technical Support StaffHigh Quality for Consistent and Reliable PerformanceUses the most advanced membrane film technology and manufacturing processesStandard dimensions to fit in commonly available housingsApplications for AMI Commercial BWRO MembranesRestaurantsAquariumsWhole House (Residential)OfficeInstitutionsHotelsHospitalsDisaster ReliefSpot Free Rinse/Car WashLabsPharmaceuticalHumidificationMistingManufacturingRinse WaterBottled WaterWater storesBeverageFood ProcessingIce MakersCommercial Water TreatmentIce MakersTap WaterBrackish WaterWide Variety of Other ApplicationsPhysical Dimensions of M-B4040ALE:Total Length (L):40 In. product manuals or literature associated with your system, and photographs of your system or membranes. (9.9 cm)PWT (P):0.75 In. AMI low energy brackish water RO membrane elements produce high quality water from tap or brackish water sources in commercial RO systems, and are among the finest in the industry. To ensure prompt and accurate information, please include as much information about your system as possible, such as: model, manufacturer, model of membranes being replaced, any available. With hundreds of thousands of membranes in operation in water filtration systems world-wide, AMI membranes have earned a reputation of delivering consistent, reliable, and long lasting performance, making AMI Membranes the natural choice for use in commercial RO systems.
469
4 X 40 , 2,900 Gpd At 150 Psi , Frp Wrapped , Low Energy Commercial Ro Membrane , Applied Membranes
Specifications of 4 X 40 , 2,900 Gpd At 150 Psi , Frp Wrapped , Low Energy Commercial Ro Membrane , Applied Membranes | |
---|---|
Category | Health & Beauty |
Instock | instock |