9 cm)Replacement Compatibility for AMI 4 X 40 RO MEMBRANESApplied Membranes M-B4040A FRP wrapped membrane elements can be used as direct replacement for many industry-standard 4x40 size RO elements with 3/4" male product water tubes ("stinger style") which are rated at 225psi.

LG Chem Nano H2O LG BW 4040 R Brackish Water (BWRO) Reverse Osmosis MembraneLG BW 4040 R High Rejection BWRO membranes offer a combination of high rejection, reliability, and durability; suitable for high salinity brackish water and wastewater reuse application.FilmTec BW30-4040Hydranautics CPA2-4040Hydranautics CPA5-LD-4040Toray TM710Specifications for LG BW 4040 RLG Chem Product:LG BW 4040 RSize (Approximate):4" Dia.5 m³/d)Applied Pressure:225 psig (15.3%Active Surface Area:85 ft2 (7.

Looking for a replacement seawater desalination membrane element for your watermaker filter system? For the past 35 years, AMI Membrane elements have earned the reputation of consistent quality.5"x19" | 170 Gpd | Seawater Ro Membrane For Crystal Sea Watermaker | Replaces Sea Recovery 2724020333 Benefits of AMI Seawater Membranes for Crystal Sea Desalination Systems:Add AMI Membrane Quality and Value to your Existing Seawater Desalination EquipmentConvert seawater into drinking water on yachts, boats, cruise ships, off- shore platforms, and resortsHigh Rejection & Flow Rate Made in the USA Manufactured in ISO 9001:2015 Certified Facilities 100% Performance and Quality Tested High Quality for Consistent and Reliable PerformanceUses the most advanced membrane film technology and manufacturing processesStandard dimensions to fit in commonly available housingsM-SR2724020333 SpecificationsAMI Model NumberM-SR2724020333Replaces Membrane Models:Sea Recovery 2724020333CYCROM CCROMHR25/19HFFor use in System ModelsSRC 170 CS-FE / 12 VDCSRC 170 CS-FE / 24 VDCSRC-CFFESRC-CSFE-170For Use in System Series:Sea Recovery Crystal Sea SeriesFor Use in Vessel:Sea Recovery B1960900012481321000Size (Approximate):2.

(60 cm)Diameter (D):1.6 cm)PWT (P):0.

High Rejection and Reliable Flow RatesMade in the USAManufactured in our ISO 9001:2015 Certified Facilities100% Performance and Quality TestedBacked by our Experienced Technical Support StaffHigh Quality for Consistent and Reliable PerformanceUses the most advanced membrane film technology and manufacturing processesStandard dimensions to fit in commonly available housingsCertified to NSF/ANSI 58 for the reduction of Arsenic, Barium, Cadmium, Chromium (Hexavalent), Chromium (Trivalent), Copper, Turbidity, Fluoride, Lead, Radium 226/228, Selenium, and TDS. AMI 12 GPD Reverse Osmosis Membrane for Home RO SystemsAMI home RO membrane elements are among the finest in the industry.

5"Filter Length:30"Material:Spun PolypropyleneFor Filter Housing:30" Standard SIngle or Multi-Cartridge Filter Housings, Including:Shelco FOS3 SeriesAMI SS Filter HousingsEden EFC and EDEN EFCS seriesHarmsco BC4-3-T-EP, BC6-3-T-EP Pentek ST-3, ST-BC12Can Replace Cartridges:SDC-25-3001, SDF-25-3001, Features and Benefits of AMI Melt-Blown Polypropylene Water Filters:Graded Pore Structure for Enhanced Dirt-Holding Capacity and Extended LifeHigh Consistency Melt Blow PolypropyleneFree of Surfactants, Binders and AdhesivesProtect downstream equipment and appliancesRemoves dirt, rust, sand, grit, and other suspended solids from waterEasy and safe cartridge incineration and disposalIdeal for use as pre-treatment to an RO SystemCommon Applications for 1 Micron Melt-Blown Polyproyplene Water Filters:Whole-House FiltrationFine Sediment FiltrationCommercial FiltrationPre-Treatment for Commercial Point of Entry (POE) FiltrationCommercial RO PretreatmentMulti-Cartridge Filter HousingsLaboratoriesInstitutionsCommercialManufacturingRinse WaterWaste WaterSurface WaterSeawaterAnd a wide variety of other applications.AMI 30" Sediment filters can be used in any filter housing designed to accept 30" standard filter cartridges.AMI H-F3001CF SpecificationsAMI Part #:H-F3001CFNominal Size:30" StandardFiltration Rating:1μ (1 Microns)Filter Diameter"2. This includes Pentek ST-3, Pentek ST-BC-12, Shelco 4FOS3, Shelco 5FOS3, Shelco 7FOS3, Shelco 12FOS3, Shelco 22FOS3, Shelco 36FOS3, , Shelco 56FOS3, C-0530-2F-316LEP, C-0530-2T-316LEP, C-0730-2F-316LEP, C-0730-2T-316LEP, C-1230-3F-316LEP, C-2230-4F-316LEP, Harmsco BC4-3-T-EP, and Harmsco BC6-3-T-EP AMI 30" Sediment filters can be used as a high quality and economical replacement for: Hydronix SDC-25-3001 and Liquitec SDF-25-3001.

AMI 20" Sediment filters can be used in any single-filter or multi-filter housing designed to accept 20" standard filter cartridges, including:Pentek #20 SlimLine, Pentek #20 Standard, Pentek #20 3GPentair #20 SlimLine, Pentair #20 Standard, Pentair #20 3GUS Filter & American Plumber 20" Standard HousingsHarmsco BC4-2, Harmsco BC6-2Eden 12EFC1-2C150, Eden 20EFCS2-3C150Shelco 4FOS2, Shelco 5FOS2, Shelco 7FOS2, Shelco 12FOSAMI H-F2020CF Filter can be used as a high quality and economical replacement for: Tier1 P20-20, Liquatec SDF-25-2020, Hydronix SDC-25-2020, Pentek P25-20, and most other 20" standard filter cartridges..5"Filter Length:20"Material:Melt-Blown PolypropyleneFor Filter Housing:20" Standard Single or Multi-Cartridge Filter Housings, Including:Pentek, Pentair, American Plumb, US FilterEden EFC, EFCS seriesHarmsco BC4-2, BC6-2Shelco FOS2 SeriesCan Replace Cartridges:Tier1 P20-20, SDC-2525-20, SDF-25-2020, MB25200-20, PX20-20, P25-20, 155226-43Features and Benefits of AMI Melt-Blown Polypropylene Water Filters:Graded Pore Structure for Enhanced Dirt-Holding Capacity and Extended LifeHigh Consistency Melt Blow PolypropyleneFree of Surfactants, Binders and AdhesivesProtect downstream equipment and appliancesRemoves dirt, rust, sand, grit, and other suspended solids from waterEasy and safe cartridge incineration and disposalIdeal for use as pre-treatment to an RO SystemCommon Applications for 10 Micron Melt-Blown Polyproyplene Depth Filters:Whole-House FiltrationCommercial FiltrationPre-Treatment for Commercial Point of Entry (POE) FiltrationCommercial RO PretreatmentMulti-Cartridge Filter HousingsLaboratoriesInstitutionsCommercialManufacturingRinse WaterWaste WaterSurface WaterSeawaterAnd a wide variety of other applications 20" Sediment Water Filter | 20 Micron Filtration Rating | Melt-blown Polypropylene Depth Filter The universal 20" standard size can be used in most single-cartridge or multi-cartridge filters housings designed for standard 20 inch filters, making AMI filters an ideal high quality and economical replacement for your water filter installation..

AMI calcite mineral cartridges are designed to fit standard filter housings for ease of compatibility - H-F2520CALCITE is 20" length and fits inside of a 20" Standard filter housings (actual outside dimensions of these housings are approximately 4.5" OD x 22" H). Use this information as a reference only.

2 Per SystemH-F1032-43ACarbon Post Filter (Stage 5)5 Stages of Filtration for Clean, Great-Tasting WaterStage 1 - Sediment FilterA 5-micron filter removes sediment including dirt, sand, rust, grit, and other suspended matter from the water..Designer chrome-plated faucet adds an attractive feature to your kitchen while dispensing filtered water right to your sink - making it convenient to use for drinking, cooking, making beverages and ice, pets, and watering houseplants.AMI 5-stage home RO system is complete with 3 Pre-Filter Cartridges, Two Reverse Osmosis Membrane Elements, Carbon Polishing Filter, a Designer Chrome-Plated Faucet, Storage Tank, Installation Kit, Filter wrenches, and all components required for automatic operation.

Benefits of AMI Seawater Desalination RO Membranes:Convert seawater into drinking water on yachts, boats, cruise ships, off-shore platforms, and resortsHigh Rejection & Flow Rate Made in the USA Manufactured in ISO 9001:2015 Certified Facilities 100% Performance and Quality Tested High Quality for Consistent and Reliable PerformanceUses the most advanced membrane film technology and manufacturing processesIndustry Standard 2.

DOW FILMTEC TW30-2521 elements are tape-wrapped.

1700 Gallon Per Day | Wall Mount Ro System | 110v 60hz 1,700 GPD Commercial Wall-Mount Reverse Osmosis SystemDesigned to produce low dissolved solids water from tap or well water, these space-saving wall-mount RO systems use high efficiency reverse osmosis membranes.

5 x 40Membrane Dimensions:2.Specifications for M-B2540AAMI Part Number:M-B2540AMembrane Size (Nominal):2.5" x 40" Brackish Water Reverse Osmosis Membrane | Fiberglasssed Shell | 1000 GPD BWROAMI commercial thin film BWRO elements are wrapped in a hard shell of FRP for added strength and to withstand higher pressure drops.

Features of Applied Membranes Nanofiltration Membranes:90% Average Ion Rejection>97% Hardness RejectionHigh flux results in high yieldsLow energy usage reduces power consumption and costDurable with good cleanability for long element lifeMade in the USAManufactured in our ISO 9001:2015 Certified Facilities100% Performance and Quality TestedBacked by our Experienced Technical Support StaffHigh Quality for Consistent and Reliable PerformanceUses the most advanced membrane film technology and manufacturing processesStandard dimensions to fit in commonly available housings M-N4040A9 SpecificationsAMI Part Number:M-N4040A9Membrane Size (Nominal):4x40Membrane Dimensions:3.

(1016 mm)Diameter (B):3.Features of Applied Membranes Ultrafiltration PES Membranes:Tolerant to Many Solvents and OilsAbsolute Bacteria and Virus RemovalFiltration to 10,000 Molecular Weight Cut-OffLow Pressure Requirements For Reduced Operating Costs and Power ConsumptionHigh Flux for High Flow RatesRobust Materials and Construction for Long LifeDurable with good cleanability for long element lifeMade in the USAManufactured in our ISO 9001:2015 Certified Facilities100% Performance and Quality TestedBacked by our Experienced Technical Support StaffHigh Quality for Consistent and Reliable PerformanceUses the most advanced membrane film technology and manufacturing processes M-U4040PESD SpecificationsAMI Part Number:M-U4040PESDMembrane Size (Nominal):4x40Membrane Dimensions:3. (99 mm)PWT ID (C):0.

Install the filter at your home's point-of-entry water line. Our water filtration systems remove chlorine, chloramine, and other chemical contaminants along with sediment, rust, dirt, silt, pesticides, herbicides, VOCs, bad tastes and odors, and cloudiness giving you clear, freshly purified water from every faucet and protect your home’s plumbing and appliances from sediment buildup. Includes a step-by-step installation and maintenance guide. Provides crystal-clear great-tasting water.

9 In.9"Dia. (1.9 cm)PWT (P):0.

Temp: 100°FFlow: Rated at 0..

AMI sediment filters can be used as pretreatment commercial RO systems or as a stand-alone commercial filter to protect piping and appliances from damage and buildup of dirt.

4 bar) @ ambient25 psid (1. Food & Drug Administration requirements for food & beverage contact.S.7 bar) @ 140°F (60°C)5 Micron Depth Filters Features5 Micron Ultra-Fine Sediment Filtration - Filters particles as small as 0.

(1.6 MPa) applied pressure, 77ºF (25ºC) feed water temperature, pH 8 and the recovery listed in the table above..

DuPont FILMTEC™ BW30 PRO-2540 Brackish Water Reverse Osmosis Membrane Element (Direct Replacement for DOW FilmTec BW30-2540) FILMTEC BW30 PRO-2540 Elements are an industry standard for reliable operation and production of high quality water.8 m³/d) Applied Pressure: 225 psig (15.5% Single Element Recovery: 15% Exterior: Hard Shell Fiberglass Membrane Type: Polyamide Thin-Film CompositePermeate flow and salt rejection based: 2,000 ppm NaCl feed stream, 77°F, pH 8, 15% recovery, 225 psig.

5"x21" | 365 Gpd | Low Energy | Tape Wrap | Filmtec Membrane DOW FILMTEC Brackish Water Reverse Osmosis Elements can separate salts from water and are produced with an automated fabrication process for precision, consistency, and reliability. In addition to high quality water and low energy costs, DOW FILMTEC membranes also deliver savings by providing long lasting and reliable performance.Operating Limits for XLE-2521 Maximum Operating Temperature: 113°F (45°C) Maximum Operating Pressure: 600 psig (41 bar) Maximum Pressure Drop: 13 psig (0.

9 cm x 78 cm)Controller Dimensions:9.

.

5"x21" Hollow Fiber Uf Membrane Element (220 To 660 Gpd).5 psi (3 bar)Temperature Range: 32°F to 104°F (0°C to 40°C)To avoid mechanical damage, do not subject the membrane to sudden temperature changes (>1°C/min) or water hammerLength (L): 18. 2.

Universal Fit - Compatible with industry-standard 20" Standard (also known as SlimLine) filter housings. Food & Drug Administration requirements for food & beverage contact.

4 cm)Diameter (D):1. With hundreds of thousands of membranes in operation in water filtration systems world-wide, AMI membranes have earned a reputation of delivering consistent, high quality which makes AMI Membranes the natural choice for use in home or office RO systems.Since the presence of free chlorine and other oxidizing agents will cause premature membrane failure, a carbon block filter should be used before this RO membrane element when filtering chlorinated water.

4m³/h) pH Range, Continuous Operation:2-11pH Range, Short-Term Cleaning:1-13Maximum Feed Silt Density Index:SDI 5Fere Clorine Tolerance:0Related Products for use with M-S3040B Seawater ElementsC-C2510-A11Membrane Cleaning Cartridge with Acid Cleaner to Remove Scale Buildup and Prolong Membrane LifeC-C2510-A22Membrane Cleaning Cartridge with Alkaline Cleaner to Remove Organics and Prolong Membrane LifeC-C2510-A88Membrane Preservative Cartridge for Preserving the System and Membrane During Extended Periods of Non-Operation.3"x40" | 900 Gpd | Seawater Ro Membrane For Sea Recovery | Replaces 2724011433 View our Watermaker Replacement Membrane Chart.

2).Specifications for M-U4040HF09AMI Part Number:M-U4040HF09Size:4" Dia..