Manufactured with KX’s proprietary extrusion process, MATRIKX Pb1 filters offer high levels of chemical reduction in potable drinking water, including chlorine taste and odor.KX MATRIKX 06-250-10-MATRIKX is the factory recommended direct replacement for 06-250-125-975 and 06-250-10-GREEN, which have been discontinued by the manfuacturer and are no longer available. The carbon is processed into blocks using a unique binder system and proprietary manufacturing techniques to produce filters with a greater number of micro-pores and available carbon surface area, which display superior adsorption capacity and kinetic dynamics. Matrikx® Pb1® Carbon Block Filters now Feature Chloramine Reduction.Lead reductionChlorine and Chloramine reductionVOC reductionCyst reduction0.5 micron nominal filtration reduces sand, rust and sedimentHigh dirt holding capacityHigh Adsorptive Capacity and Efficiency100% Coconut Shell Activated CarbonNSF and WQA certified for Material SafetyPerformance validated by independent laboratoriesManufactured in an ISO 9001 & 14001 certified facilityCertified for Sustainability by WQA - S-803California Prop. KX MATRIKX Pb1 Lead, VOC, Cyst, Chlorine, Chloramine, Taste and Odor Reduction10 Inch Standard Size , 06-250-10-MATRIKX , 0.5 Micron , Replaces 06-250-125-975 & 06-250-10-GREENThe KX MATRIKX Pb1 is a powerful, multifunctional filter cartridge for residential and commercial water treatment, providing exceptional lead and cyst reduction (including Cryptosporidium, Giardia, Entamoeba and Toxoplasma). Particulate filtration is used to intercept insoluble lead-containing particles. 65 CompliantSpecifications for 10" Matrikx Pb1KX Part #:06-250-10-MATRIKXReplaces Part #:KX 06-250-125-975KX 06-250-10-GREENGreenBlock FX10PB1Filter Size:(Nominal)10" Standard (2½" x 10")Filter Dimensions:2.75" OD x 9.75"LFor Contaminants:Lead, Cyst, VOC, Chlorine, Chloramine, Taste, Odor, Sediment, Dirt, RustNominal Filtration:0.5 MicronChlorine Reduction Capacity:>30,000 gallons @ 1 gpm(>114,000 liters @ 3.8 lpm)Chloramine Reduction:>2,000 gallons @ 0.5 gpm(>7,600 liters @ 1.9 lpm)VOC Reduction Capacity:>500 gallons @ 0.5 gpm(>1890 liters @ 1.9 lpm)Lead Reduction Capacity:>3,750 gallons @ 0.75 gpm(>14,000 liters @ 2.8 lpm)Initial ΔP @ Flow:12psid @ 1gpmManufacturer:KX TechnologiesBrand:MATRIKX Pb110" Standard Housings:AMI Filter HousingsAmetek/Pentek HousingsBenefits of KX MATRIKX Extruded Carbon FiltersChlorine Taste and Odor Reduction as well as Dirt and Sediment Removal: for better tasting drinking water, and protection of downstream equipment.No release of carbon fines: Extruded carbon filters do not release activated carbon particles ("gray water") during startup or operation. KX MATRIKX Pb1 activated carbon block filters reduce soluble lead using an ion-exchange filter medium with high specificity for soluble lead. This results in nearly fifteen times more prefiltration surface area and a much lower flow "density".Low binder content and high dirt capacity: Only a small amount of thermoplastic binder is used in the extrusion process, about one-half of what is used in a molded carbon block.About KX MATRIKX SustainabilityMatrikx® filters are made from 100% coconut shell carbon, a renewable, and ecologically sustainable material. Extensive flushing or "activation" of extruded filter elements is not required.No channeling, fluidizing, or bypassing: Extruded carbon is a rigid structure that prevents movement of the adsorbent particles or the formation of channels and defects in the adsorbent structure.Low pressure drop: Water flows through an extruded filter element in the "radial" direction (from the outside of the filter element to the inside).
469
10 Standard , Kx 0.5 Micron Carbon Block Filter With Lead & Cyst Reduction
Specifications of 10 Standard , Kx 0.5 Micron Carbon Block Filter With Lead & Cyst Reduction | |
---|---|
Category | Health & Beauty |
Instock | instock |