Element Permeate flow may vary +/- 20%Operating Limits for M-S2538A-210 33-3002Maximum Operating Temperature:113°F (45°C) Maximum Operating Pressure:1,000 psig (69 bar)Maximum Pressure Drop:15 psig (1 bar)Maximum Feed Flow Rate:6 gpm (1.4m³/h) pH Range, Continuous Operation:2-11pH Range, Short-Term Cleaning:1-13Maximum Feed Silt Density Index:SDI 5Fere Clorine Tolerance:0Related Products for use with M-S2538A-210 33-3002 Seawater ElementsC-C2510-A11Membrane Cleaning Cartridge with Acid Cleaner to Remove Scale Buildup and Prolong Membrane LifeC-C2510-A22Membrane Cleaning Cartridge with Alkaline Cleaner to Remove Organics and Prolong Membrane LifeC-C2510-A88Membrane Preservative Cartridge for Preserving the System and Membrane During Extended Periods of Non-Operation.655139-03Oil Absorbing Filter Cartridge - Oil-Water Separator Replacement Cartridge, 20" Big Blue Pentair Pentek FilterH-F10100CFPlankton Filter - 10" Standard 100 Micron Spun Polypropylene Replacement Filter CartridgeCommon Applications for AMI Seawater Watermaker Elements:Seawater DesalinationMarine ApplicationsWatermaker RO SystemsYachtsPhysical D View our Watermaker Replacement Membrane Chart.Benefits of AMI Seawater Membranes for Village Marine Watermakers:Add AMI Membrane Quality and Value to your Existing Seawater Desalination EquipmentConvert seawater into drinking water on yachts, boats, cruise ships, off- shore platforms, and resortsHigh Rejection & Flow Rate Made in the USA Manufactured in ISO 9001:2015 Certified Facilities 100% Performance and Quality Tested High Quality for Consistent and Reliable PerformanceUses the most advanced membrane film technology and manufacturing processesStandard dimensions to fit in commonly available housingsSpecifications for M-S2538A-210 33-3002AMI Model NumberM-S2538A-210For use in Systems:Little Wonder 200Can Replace Models:Village Marine 33-3002AquaPro 33-3002Parker 33-3002Size (Approximate):2.5" Dia. Looking for a replacement seawater desalination membrane element for your watermaker filter system? AMI 2.5x38 Seawater Desalination Reverse Osmosis Membrane AquaPro Replacement For Replacement in Village Marine LIttle Wonder 200 Watermaker Systems by Parker RacorAdd AMI Membrane Quality to your Existing Seawater Desalination EquipmentAMI 2.5" x 38" Seawater RO Membranes produce drinking water from seawater and are intended for use as replacements in Village Marine Watermakers Little Wonder 200 LW-200 with exceptional value and performance benefits. x 38"LFlow Rate:210 gpd (795 lpd)Applied Pressure:800 psig (55 bar)Stabilized Salt Rejection:99.6%Minimize Salt Rejection:99.4%Single Element Recovery:8%Exterior:Hard Shell FiberglassMembrane Type:Polyamide Thin-Film CompositePermeate flow and salt rejection based on 32,000 ppm NaCl feed stream, pressure and recovery listed above. AMI SWRO membranes offer the high rejection and high productivity that is ideal for seawater desalination in shipboard applications, watermakers, land-based desalinators and sea-based desalinator.AMI Membranes are Made in the USA in their ISO 9001:2015 Certified Facility and are 100% Quality and Performance Tested.
469
2.5x38 , 210 Gpd , Ro Membrane For Village Marine Watermaker
Specifications of 2.5x38 , 210 Gpd , Ro Membrane For Village Marine Watermaker | |
---|---|
Category | Health & Beauty |
Instock | instock |