1.8 X 12 36 Gpd Nf 90% Rejection Membrane

25" OD x 9¾"LFor Contaminants:Chlorine & ChloramineTaste & OdorSediment, Dirt, RustNominal Filtration:5 MicronChlorine Taste & Odor Reduction:>36,000 gallons @ 3 gpmChloramine Reduction:3,000 gallons @ 1.

AMI 2.65 m³/d)Applied Pressure:800 psig (55 bar)Stabilized Salt Rejection:99.655139-03Oil Absorbing Filter Cartridge - Oil-Water Separator Replacement Cartridge, 20" Big Blue Pentair Pentek FilterH-F10100CFPlankton Filter - 10" Standard 100 Micron Spun Polypropylene Replacement Filter Cartridge x 40"LFlow Rate:700 gpd (2.

This includes Pentek ST-3, Pentek ST-BC-12, Shelco 4FOS3, Shelco 5FOS3, Shelco 7FOS3, Shelco 12FOS3, Shelco 22FOS3, Shelco 36FOS3, , Shelco 56FOS3, C-0530-2F-316LEP, C-0530-2T-316LEP, C-0730-2F-316LEP, C-0730-2T-316LEP, C-1230-3F-316LEP, C-2230-4F-316LEP, Harmsco BC4-3-T-EP, and Harmsco BC6-3-T-EP AMI 30" Sediment filters can be used as a high quality and economical replacement for: Hydronix SDC-25-3010 and Liquitec SDF-25-3010.

0-60 psi pressure gauges are also used to measure incoming pressure for Silt Density Index Testing, such as AMI Direct SDI Silt Density Index Test Kit.Applications for LIquid Filled Pressure GaugesSilt Density Index Test KitsReverse Osmosis SystemsWater Dispensing SystemsTap Water GroundwaterCommercial Water TreatmentSpecifications for I-PG60NAMI Part Number:I-PG60NMounting:Panel-MountRange:0-60 psiCase Material:Stainless SteelBourdon Tube:BronzeConnection:1/4" NPTOther Features:Liquid Filled 0-60 Psi Panel Mount Liquid Filled Pressure Gauge These back-mount style pressure gauges are designed to be mounted to the control panel of a water treatment system.

 In & Out Pressure GaugesTake the guesswork out of maintenance and let you know when it is time to change the filters. Next the water passes through Applied Membrane's advanced Ultra-High Performance Lead carbon filter which absorbs bad tastes and odors while removing undissolved lead, cysts, chlorine, chloramine as well as 100s of other chemical contaminants commonly found in tap water. Includes a step-by-step installation and maintenance guide.System SpecificationsAMI Part Number:FA-310BB-5CPB-1Number of Stages:3 StageFilters Included:5 Micron SedimentLead Carbon FilterDissolved Lead FilterHousing Size:10" Big BlueIn/Out Connections:1" Female NPTMaximum Flow Rate:15 GPM*Water Temperature Range40º - 100ºFMaximum Incoming Pressure:90 psiAdditional EquipmentIncluded:In/Out Pressure GaugesFilter Wrench*Performance results may vary depending on feed water quality.

2.3 cm)Membrane Length (I):19 In.5” X 21” | 405 Gpd High Flow Reverse Osmosis Ro Membrane | Applied Membranes (53.

Physical Dimensions of Nanofiltration Element:Total Length (L):11. (29.

(96 cm)Diameter (D):3.9"Dia. 4" x 40" Extra-Low Energy Brackish Water RO Membrane | Fiberglasssed Shell | 2,860 GPD BWRO XLEApplied Membranes XLE Extra-Low Energy (Ultra-Low Pressure) RO Membrane elements are specially designed to run at 100 psi while producing the same product flow as standard elements.

Physical Dimensions of Nanofiltration Element:Total Length (L):11.(4.4 cm)Diameter (D):1. Nanofiltration Membranes for Water Treatment SystemsNote: Actual color of tape may vary from the item pictured.

9 cmm)Replacement Compatibility for AMI 4 X 40 XLE RO MEMBRANESApplied Membranes M-B4040AXLE FRP wrapped extra-low-energy membrane elements can be used as direct replacement for many industry-standard ultralow pressure 4x40 size RO elements with 3/4" male product water tubes ("stinger style") which are rated at 100psi - including CSM RE4040-BLF.High Rejection & Flow RateHard fiberglass exterior provides added strength and withstands higher pressure drops than tape-wrapped elements.