reorder
health-food.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Health & Beauty

20 Standard , Deionization Filter Cartridge (di Filter) , For High Purity Water

About The Highly purified and high capacity mixed bed strong anion and strong cation semiconductor grade resins.Our blend of highly purified ion exchange resins will deliver high purity water with a minimum TOC background.AMI DI Water Filters are designed to fit standard filter housings for ease of compatibility - H-F2520DI is 20" length and fits inside of a 20" Standard filter housings (actual outside dimensions of these housings are approximately 4. x 20" LengthFor Housing Size:Fits #20 Standard 20" Filter Housing - Approx

They can be used in a recirculating mode or as a polisher for RO product water.AMI DI Water Filters are designed to fit standard filter housings for ease of compatibility - H-F2520DI is 20" length and fits inside of a 20" Standard filter housings (actual outside dimensions of these housings are approximately 4.5" OD x 22" H).Features and Benefits of AMI Calcite Filter CartridgesBuilt-in 100 micron reticulated poly foam pre filter to prevent contamination buildup in the resin bedBuilt-in 20 micron spun-bonded polypropylene post filter to prevent media fines from being washed out of the filter cartridgeConstructed of FDA Grade Materials and Media.Standard Cartridge Design Fits Most Standard Residential and Commercial Filter HousingsAssembled and Quality Tested in the USA in an ISO 9001-2015 QMS Certified FacilityH-F2520DI SpecificationsModel:H-F2520DIBrand: Applied Membranes, Inc. Media:Semiconductor Grade Mixed Bed Deionization ResinPurpose:Delivers High-Purity WaterNominal Filter Size:20" Standard2.5" Dia. Constructed from FDA grade materials and media, these cartridges are designed as a polisher for low TDS feed water. Outside Dimensions: 4.5"OD x 22"HFlow Rate:0.5 to 1 gpmCapacity for Deionization:15,000 ppm gallonsCommon Uses for Applied Membranes Water De-Ionization FiltersSome common uses for Deionization Water Filters include: Post treatment to RO SystemDrinking WaterAquarium & ReefkeepingLaboratoryMedicalBoiler Feed WaterCosmeticsPharmaceuticalSpot-Free RinseHumidificationMistingManufacturing Rinse WaterCircuit Board PrintingCommercial Water TreatmentPower Generating EquipmentAny application where high purity water is required Highly purified and high capacity mixed bed strong anion and strong cation semiconductor grade resins. Deionization Water Filter Cartridge (DI Filter) for Ultra-Pure WaterHigh Purity Semiconductor Grade Mixed Bed DI Resin , Fits 20" Standard Filter HousingApplied Membranes DI filters use ion exchange process to deliver high-purity multi meg-ohm quality water with a minimum toc background that is perfect for aquariums, reefkeeping, laboratories, rinsing, plating, pharmaceutical, semiconductor, medical, and industrial applications.Our blend of highly purified ion exchange resins will deliver high purity water with a minimum TOC background. x 20" LengthFor Housing Size:Fits #20 Standard 20" Filter Housing - Approx.

469

20 Standard , Deionization Filter Cartridge (di Filter) , For High Purity Water

AMI Home RO Membranes are constructed of tap water TFC (thin film composite) membrane material and fit standard residential home RO Housings for point of use systems.
5 Micron Nominal Filtration Rating (10 Micron Absolute Filtration Rating).KX MATRIKX 32-450-20-MATRIKX is the factory recommended direct replacement for 32-450-20-GREEN and 32-425-125-20, which have both been discontinued by the manufacturer.Matrikx® CTO® Carbon block filters are now rated for Cloramine reduction.Chlorine and Chloramine Reduction5 micron nominal filtration reduces sand, rust, and sediment.Exceptionally low pressure drop.High dirt holding capacity.Excellent chemical contaminant reduction.High Adsorptive Capacity and Efficiency.NSF and WQA certification for Material Safety.100% Coconut Shell Activated CarbonPerformance validated by independent laboratoriesManufactured in an ISO 9001 & 14001 certified facilityCertified for Sustainability by WQA - S-803California Prop.
More from AMI! They Can Be Used In A Recirculating Mode Or As A Polisher For RO Product Water.AMI DI Water Filters Are Designed To Fit Standard Filter Housings For Ease Of Compatibility - H-F2520DI Is 20" Length And Fits Inside Of A 20" Standard Filter Housings (actual Outside Dimensions Of These Housings Are Approximately 4.5" OD X 22" H).Features And Benefits Of AMI Calcite Filter CartridgesBuilt-in 100 Micron Reticulated Poly Foam Pre Filter To Prevent Contamination Buildup In The Resin BedBuilt-in 20 Micron Spun-bonded Polypropylene Post Filter To Prevent Media Fines From Being Washed Out Of The Filter CartridgeConstructed Of FDA Grade Materials And Media.Standard Cartridge Design Fits Most Standard Residential And Commercial Filter HousingsAssembled And Quality Tested In The USA In An ISO 9001-2015 QMS Certified FacilityH-F2520DI SpecificationsModel:H-F2520DIBrand: Applied Membranes, Inc.
Search

469

Specifications of 20 Standard , Deionization Filter Cartridge (di Filter) , For High Purity Water

CategoryHealth & Beauty
Instockinstock

Last Updated

20 Standard , Deionization Filter Cartridge (di Filter) , For High Purity Water
More Varieties

20 Standard , Deionization Filter Cartridge (di Filter) , For High Purity Water
20 Standard , Deionization Filter Cartridge (di Filter) , For High Purity Water
20 Standard , Deionization Filter Cartridge (di Filter) , For High Purity Water
20 Standard , Deionization Filter Cartridge (di Filter) , For High Purity Water
20 Standard , Deionization Filter Cartridge (di Filter) , For High Purity Water
20 Standard , Deionization Filter Cartridge (di Filter) , For High Purity Water
Rating :- 9.54 /10
Votes :- 12
Designed to fit industry-standard 10" Standard (also known as SlimLine) filter housings.SpecificationsModel:H-F1001CFBrand: Applied Membranes, Inc.Nominal Filtration Rating:1 MicronNominal Size:10" StandardActual Cartridge Dimensions:2.5" OD x 1.125" ID x 9.75"LFor Housing Dimensions:4.5"OD x 11.4"L (Approx.)Changeout Differential Pressure:35 psid (2.4 bar) recommendedMax.

Designed to fit industry-standard 10" Standard (also known as SlimLine) filter housings.SpecificationsModel:H-F1001CFBrand: Applied Membranes, Inc.Nominal Filtration Rating:1 MicronNominal Size:10" StandardActual Cartridge Dimensions:2.5" OD x 1.125" ID x 9.75"LFor Housing Dimensions:4.5"OD x 11.4"L (Approx.)Changeout Differential Pressure:35 psid (2.4 bar) recommendedMax.

Protect Appliances, Plumbing, Fixtures, and Equipment from damage due to sediment buildup & clogging.00004" (1/50th the size of a human hair).Universal Fit - Compatible with industry-standard 10" Standard (also known as SlimLine) filter housings.4 bar) @ ambient25 psid (1.

  • Health & Beauty
    • See manufacturer's specification sheet for flow rates at different doses.What Size of UV System Do I Need?

    See manufacturer's specification sheet for flow rates at different doses.What Size of UV System Do I Need?

    1 Gpm | Sterilight Point Of Use Uv System | Viqua Tap TAP systems are also suitable for fountains or low-flow applications (1-4 gpm).Replacement Parts for VIQUA VT1S212RLUV Lamp Only for VIQUA VT1QS-212UV Quartz Sleeve Only for VIQUA VT1BA-VTController Kit for VIQUA Tap Series410867Lamp O-Ring for VIQUA UVRN-001Retaining Nut for VIQUA UV4109958-R2.

  • Health & Beauty
    • x 21"LMolecular Weight Cut-Off:10,000Spacer:30 milExterior:Tape WrappedOperating Limits for PES ElementsMaximum Operating Temperature:140°F (60°C) at 100 psiMaximum Operating Pressure:150 psi (10 bar) at 77°F (25°C) Maximum Feed Flow Rate:20 gpm (1.4m³/h) pH Range, Continuous Operation:2-11pH Range, Short-Term Cleaning:1-13Fere Clorine Tolerance:5,000 ppm daysRelated Products for use with 25x21 PES UF ElementsPV2521PVCAU2.5x21 Membrane Housing - PVC - U-Pin Style End ClosuresPV2521SSAU-3162.5x21 Membrane Housing - 316 Stainless Steel - U-Pin Style End ClosuresCommon Applications for Polyethersulfone Ultrafiltration Elements:Absolute bacteria and virus removal from surface waters, beverage and liquid food processing and byproduct streamsApplications requiring tolerance to solventsTreatment of oil, food, and pharmaceutical streams that require resistance to many esters and aromaticsRecovery of proteins, gelatin, enzymes, whey proteinPhysical Dimensions of M-U2521PES UF Element

    x 21"LMolecular Weight Cut-Off:10,000Spacer:30 milExterior:Tape WrappedOperating Limits for PES ElementsMaximum Operating Temperature:140°F (60°C) at 100 psiMaximum Operating Pressure:150 psi (10 bar) at 77°F (25°C) Maximum Feed Flow Rate:20 gpm (1.4m³/h) pH Range, Continuous Operation:2-11pH Range, Short-Term Cleaning:1-13Fere Clorine Tolerance:5,000 ppm daysRelated Products for use with 25x21 PES UF ElementsPV2521PVCAU2.5x21 Membrane Housing - PVC - U-Pin Style End ClosuresPV2521SSAU-3162.5x21 Membrane Housing - 316 Stainless Steel - U-Pin Style End ClosuresCommon Applications for Polyethersulfone Ultrafiltration Elements:Absolute bacteria and virus removal from surface waters, beverage and liquid food processing and byproduct streamsApplications requiring tolerance to solventsTreatment of oil, food, and pharmaceutical streams that require resistance to many esters and aromaticsRecovery of proteins, gelatin, enzymes, whey proteinPhysical Dimensions of M-U2521PES UF Element

    5x21 Polyethersulfone (PES) Ultrafiltration Membrane ElementAMI® polyethersulfone (PES) spiral wound ultrafiltration(UF) membrane elements provide removal of fine particles from aqueous solutions to a molecular weight cut-off (MWCO) of 10,000.5" X 21" Uf Pes Membrane 10,000 Mwco AMI 2.

  • Health & Beauty
    • Powerful but still compact, the VH410 UV disinfection system is designed for the larger home or light commercial application and is recommended for a flow rate of 18 gpm (68 lpm).Features of VIQUA HOME Series Sterilight Water Disinfection SystemsVIQUA UV Water Systems are equipped to inactivate chlorine-resistant parasites such as Cryptosporidium and Giardia, harmful bacteria like E.Coli, and viruses not visible to the naked eye.Specially designed and tested Sterilume™-EX UV lamps provide consistent and reliable ultraviolet output over the entire life of the lamp (9000 hours) to ensure continuous purification.Sterilight UV Water Systems are simple to maintain and service allowing for easy lamp replacement.VIQUA UV Systems are built with a durable stainless steel chamber to prolong life and eliminate ultraviolet light degradation.The UV Lamp controller visually displays the remaining lamp life and will go into alarm if the lamp fails.

    Powerful but still compact, the VH410 UV disinfection system is designed for the larger home or light commercial application and is recommended for a flow rate of 18 gpm (68 lpm).Features of VIQUA HOME Series Sterilight Water Disinfection SystemsVIQUA UV Water Systems are equipped to inactivate chlorine-resistant parasites such as Cryptosporidium and Giardia, harmful bacteria like E.Coli, and viruses not visible to the naked eye.Specially designed and tested Sterilume™-EX UV lamps provide consistent and reliable ultraviolet output over the entire life of the lamp (9000 hours) to ensure continuous purification.Sterilight UV Water Systems are simple to maintain and service allowing for easy lamp replacement.VIQUA UV Systems are built with a durable stainless steel chamber to prolong life and eliminate ultraviolet light degradation.The UV Lamp controller visually displays the remaining lamp life and will go into alarm if the lamp fails.

    See manufacturer's specification sheet for flow rates at different doses.Chemical-freeEasy to install and serviceEconomical and energy efficient Specifications for VIQUA VH410AMI Part Number:VH410Recommended Flow Rate:*18 GPM (68 LPM)Plug:N.

  • Health & Beauty
    • With hundreds of thousands of membranes in operation in water filtration systems world-wide, AMI membranes have earned a reputation of delivering consistent, reliable, and long lasting performance, making AMI Membranes the natural choice for use in commercial RO systems.

    With hundreds of thousands of membranes in operation in water filtration systems world-wide, AMI membranes have earned a reputation of delivering consistent, reliable, and long lasting performance, making AMI Membranes the natural choice for use in commercial RO systems.

    AMI Commercial RO Membranes are constructed of tap water TFC (thin film composite) membrane material and fit industry-standard PVC and Stainless Steel RO Membrane Housings.Country of Manufacture:United States (USA)Note: Performance specifications based on 2,000 mg/l sodium chloride, 225 psi (1. To ensure prompt and accurate information, please include as much information about your system as possible, such as: model, manufacturer, model of membranes being replaced, any available.5 x 40 Membrane Dimensions:2.

  • Health & Beauty
    • 5 Micron Nominal Filtration Rating (10 Micron Absolute Filtration Rating).KX MATRIKX 32-450-20-MATRIKX is the factory recommended direct replacement for 32-450-20-GREEN and 32-425-125-20, which have both been discontinued by the manufacturer.Matrikx® CTO® Carbon block filters are now rated for Cloramine reduction.Chlorine and Chloramine Reduction5 micron nominal filtration reduces sand, rust, and sediment.Exceptionally low pressure drop.High dirt holding capacity.Excellent chemical contaminant reduction.High Adsorptive Capacity and Efficiency.NSF and WQA certification for Material Safety.100% Coconut Shell Activated CarbonPerformance validated by independent laboratoriesManufactured in an ISO 9001 & 14001 certified facilityCertified for Sustainability by WQA - S-803California Prop.

    5 Micron Nominal Filtration Rating (10 Micron Absolute Filtration Rating).KX MATRIKX 32-450-20-MATRIKX is the factory recommended direct replacement for 32-450-20-GREEN and 32-425-125-20, which have both been discontinued by the manufacturer.Matrikx® CTO® Carbon block filters are now rated for Cloramine reduction.Chlorine and Chloramine Reduction5 micron nominal filtration reduces sand, rust, and sediment.Exceptionally low pressure drop.High dirt holding capacity.Excellent chemical contaminant reduction.High Adsorptive Capacity and Efficiency.NSF and WQA certification for Material Safety.100% Coconut Shell Activated CarbonPerformance validated by independent laboratoriesManufactured in an ISO 9001 & 14001 certified facilityCertified for Sustainability by WQA - S-803California Prop.

    KX MATRIKX CTO Carbon Filter for Chlorine Taste and Odor Reduction20 Inch Big Blue Size | 32-450-20-MATRIKX | 5 Micron | Replaces 32-450-20-GREEN & 32-425-125-20KX MATRIKX CTO® filters are optimized for applications where they perform the role of both a sediment and activated carbon filter for chlorine taste and odor reduction. 65 Compliant. MATRIKX products are manufactured using sustainable materials and a processthat is kind to the environment.

  • Health & Beauty
    • Constructed from FDA grade materials and media, these cartridges are designed as a polisher for low TDS feed water.

    Constructed from FDA grade materials and media, these cartridges are designed as a polisher for low TDS feed water.

    5"OD x 22"HFlow Rate:0. x 20" LengthFor Housing Size:Fits #20 Standard 20" Filter Housing - Approx.

  • Health & Beauty
    • AMI Home RO Membranes are constructed of tap water TFC (thin film composite) membrane material and fit standard residential home RO Housings for point of use systems.

    AMI Home RO Membranes are constructed of tap water TFC (thin film composite) membrane material and fit standard residential home RO Housings for point of use systems.

    85 cm)Scroll Length (I):10.Specifications for M-T1812A150AMI Part Number:M-T1812A150Flow Rate:150 GPD (568 LPD)Membrane Type:TFC (Thin Film Composite)Minimum Salt Rejection:96%Stabilized Salt Rejection:98%For Housing:Standard Residential 2" x 12"PV2012PMECondition:NewSince the presence of free chlorine and other oxidizing agents will cause premature membrane failure, a carbon block filter should be used before this RO membrane element when filtering chlorinated water.High Rejection & Flow RateMade in the USAManufactured in our ISO 9001:2015 Certified Facilities100% Performance and Quality TestedBacked by our Experienced Technical Support StaffHigh Quality for Consistent and Reliable PerformanceUses the most advanced membrane film technology and manufacturing processesStandard dimensions to fit in commonly available housingsApplications for AMI Home RO MembranesIn the Home for Drinking, Cooking, Pets, and PlantsOfficesAquariumsInstitutionsRestaurantsIce MakersLabsUnder the Counter/Under the Sink ROPoint of use RO SystemsDimensions of M-T1812A150 Home RO MembraneTotal Length (L):11.

  • Health & Beauty
    • Constructed from FDA grade materials and media, these cartridges are designed as a polisher for low TDS feed water.

    Constructed from FDA grade materials and media, these cartridges are designed as a polisher for low TDS feed water.

    Features and Benefits of AMI Calcite Filter CartridgesBuilt-in 100 micron reticulated poly foam pre filter to prevent contamination buildup in the resin bedBuilt-in 20 micron spun-bonded polypropylene post filter to prevent media fines from being washed out of the filter cartridgeConstructed of FDA Grade Materials and Media.

  • Health & Beauty
    • AMI Home RO Membranes are constructed of tap water TFC (thin film composite) membrane material and fit standard residential home RO Housings for point of use systems.

    AMI Home RO Membranes are constructed of tap water TFC (thin film composite) membrane material and fit standard residential home RO Housings for point of use systems.

    Performance specifications based on 500 ppm tap water, 50 psi (0.High Rejection & Flow RateMade in the USAManufactured in our ISO 9001:2015 Certified Facilities100% Performance and Quality TestedBacked by our Experienced Technical Support StaffHigh Quality for Consistent and Reliable PerformanceUses the most advanced membrane film technology and manufacturing processesStandard dimensions to fit in commonly available housingsApplications for AMI Home RO MembranesIn the Home for Drinking, Cooking, Pets, and PlantsOfficesAquariumsInstitutionsRestaurantsIce MakersLabsUnder the Counter/Under the Sink ROPoint of use RO SystemsDimensions of M-T1812A150 Home RO MembraneTotal Length (L):11.Specifications for M-T1812A150AMI Part Number:M-T1812A150Flow Rate:150 GPD (568 LPD)Membrane Type:TFC (Thin Film Composite)Minimum Salt Rejection:96%Stabilized Salt Rejection:98%For Housing:Standard Residential 2" x 12"PV2012PMECondition:NewSince the presence of free chlorine and other oxidizing agents will cause premature membrane failure, a carbon block filter should be used before this RO membrane element when filtering chlorinated water.

  • Health & Beauty