reorder
health-food.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Health & Beauty

4x40 Brackish Water , 2,700 Gpd , 100 Psi , 99.0% Rej , 85 Ft2 , Lg Chem Ro Membrane

About The 0Maximum Feed Flow Rate:16 gpm (3. Please note that additional hardware or adapters may be required - refer to the pressure vessel and element drawings, or contact us to verify.0%Active Surface Area:85 ft2 (7.9 (100)C

LG Chem Nano H2O LG BW 4040 UES Brackish Water (BWRO) Reverse Osmosis MembraneLG BW 4040 UES Ultra Energy Saving Brackish Water RO membranes offer high permeability at low feed pressure significantly reducing operating costs; suitable for low salinity brackish water applications. LG BWRO membranes, all incorporated with innovative Thin Film Nanocomposite (TFN) technology, are offered in industry standard configurations and can easily fit into existing and new RO plants.LG BW 4040 UES Compatibility Information LG BW 4040 UES Membrane Element can be used as a replacement for the below membrane elements in your existing water treatment equipment. Please note that additional hardware or adapters may be required - refer to the pressure vessel and element drawings, or contact us to verify.FilmTec XLE-4040Hydranautics ESPA4-4040Toray MH10ASpecifications for LG BW 4040 UESLG Chem Product:LG BW 4040 UESSize (Approximate):4" Dia. Permeate flows for individual elements will vary with no less than 85% of the specified datasheet flow.Operating Limits for LG BW 4040 UESMaximum Applied Pressure:600 psig (41 bar)Maximum Chlorine Concentration: x 40"LFlow Rate:2,700 gpd (10.2 m³/d)Applied Pressure:100 psig (6.9 bar)Stabilized Salt Rejection:99.0%Minimum Salt Rejection:98.0%Active Surface Area:85 ft2 (7.9 m2)Single Element Recovery:15%End Style:Standard Male PWTExterior:Hard Shell FiberglassFeed Spacer:28 milMembrane Type: Thin Film NanocompositeCan Replace Elements:FilmTec XLE-4040Hydranautics ESPA4-4040 Toray MH10APermeate flow and salt rejection based: 500 ppm NaCl feed stream, 77°F (25°C), 15% recovery, pH7, and 100 psig (6.9 bar). LG Chem’s NanoH2O™ brackish water RO membranes serve various municipal and industrial applications and major utilities around the world.

469

4x40 Brackish Water , 2,700 Gpd , 100 Psi , 99.0% Rej , 85 Ft2 , Lg Chem Ro Membrane

Consult with a water treatment professional for design flow rates for a specific application.To avoid mechanical damage, do not subject the membrane to sudden temperature changes (>1°C/min) or water hammerAdvantages of AMI HF UF Membranes:Ideal for Pre-Treatment to Reverse OsmosisCan be used in Standard RO Housing with Filtrate Connector Kit (sold separately)Reliable Rejection of Microorganisms and VirusesExcellent Quality of FiltrateEasy Installation and Handling4x21 UF HF Membrane Dimensions:Length (L): 18.7" (475 mm +/- 1.5)Outer Diameter (D): 3.94" (100 mm)Filtrate Connection (F): 1.12:" (28.4 mm)
40" LengthNominal Membrane Area:80 ftTest Pressure:800 PSI (5.5 MPa)*Please see membrane product specifications sheet for test conditions and complete performance information.
More from Health & Beauty | Permeate Flows For Individual Elements Will Vary With No Less Than 85% Of The Specified Datasheet Flow.Operating Limits For LG BW 4040 UESMaximum Applied Pressure:600 Psig (41 Bar)Maximum Chlorine Concentration:
Search

469

Specifications of 4x40 Brackish Water , 2,700 Gpd , 100 Psi , 99.0% Rej , 85 Ft2 , Lg Chem Ro Membrane

CategoryHealth & Beauty
Instockinstock

Last Updated

4x40 Brackish Water , 2,700 Gpd , 100 Psi , 99.0% Rej , 85 Ft2 , Lg Chem Ro Membrane
More Varieties

4x40 Brackish Water , 2,700 Gpd , 100 Psi , 99.0% Rej , 85 Ft2 , Lg Chem Ro Membrane
Rating :- 9.65 /10
Votes :- 10
DuPont’s fully automated element production enables consistent products and minimizes the total cost of ownership of water treatment systems.
  • Health & Beauty
    • AMI Membranes are Made in the USA in their ISO 9001:2015 Certified Facility and are 100% Quality and Performance Tested.Looking for a replacement seawater desalination membrane element for your watermaker filter system?

    AMI Membranes are Made in the USA in their ISO 9001:2015 Certified Facility and are 100% Quality and Performance Tested.Looking for a replacement seawater desalination membrane element for your watermaker filter system?

     Benefits of AMI Seawater Desalination RO Membranes:Convert seawater into drinking water on yachts, boats, cruise ships, off-shore platforms, and resortsHigh Rejection & Flow RateMade in the USAManufactured in ISO 9001:2015 Certified Facilities100% Performance and Quality TestedHigh Quality for Consistent and Reliable PerformanceUses the most advanced membrane film technology and manufacturing processesStandard dimensions to fit in commonly available housingsM-S4040A SpecificationsAMI Model NumberM-S4040ACan Replace Models:DOW SW30-4040,DuPont SW30-4040,FilmTec SW30-4040,Spectra FT-MB-SW4x40,Koch 1820SSIndustry-Standard 4x40 Size Seawater RO ElementsSize (Approximate):4" Dia.655139-03Oil Absorbing Filter Cartridge - Oil-Water Separator Replacement Cartridge, 20" Big Blue Pentair Pentek FilterH-F10100CFPlankton Filter - 10" Standard 100 Micron Spun Polypropylene Replacement Filter CartridgeCommon Applications for AMI Seawater Watermaker Elements: x 40"LFlow Rate:1950 gpd (7.6m³/h) pH Range, Continuous Operation:2-11pH Range, Short-Term Cleaning:1-13Maximum Feed Silt Density Index:SDI 5Fere Clorine Tolerance:0 Related Products for use with M-S4040A Seawater Elements40E100-14x40 Fiberglass Membrane Housing for Seawater RO Membranes (Water Maker Pressure Vessel)C-C2510-A11Membrane Cleaning Cartridge with Acid Cleaner to Remove Scale Buildup and Prolong Membrane LifeC-C2510-A22Membrane Cleaning Cartridge with Alkaline Cleaner to Remove Organics and Prolong Membrane LifeC-C2510-A88Membrane Preservative Cartridge for Preserving the System and Membrane During Extended Periods of Non-Operation.4%Single Element Recovery:8%Exterior:Hard Shell FiberglassMembrane Type:Polyamide Thin-FilmCompositeFor Use in Systems:Watermakers or marine systems using 4x40 SWRO MembranesKatadyn Spectra Systems:Spectra Farallon 1800c,Spectra Farallon 2800c,Spectra LB 1800,Spectra LB 4000 Permeate flow and salt rejection based on 32,000 ppm NaCl feed stream, pressure and recovery listed above.

  • Health & Beauty
    • Operating Limits for BW30 PRO-4040 Maximum Operating Temperature: 113°F (45°C) Maximum Operating Pressure: 600 psig (41 bar) Maximum Pressure Drop: 15 psig (1 bar) Maximum Feed Flow Rate: 16 gpm (3.6m³/h) pH Range, Continuous Operation*: 2-11 pH Range, Short-Term Cleaning**: 1-13 Maximum Feed Silt Density Index: SDI 5 Fere Clorine Tolerance:
  • Health & Beauty
    • DOW FILMTEC SW30 elements may also be operated at lower pressure to reduce pump size, cost, and operating expensesDuPont (formerly DOW) FILMTEC SW30-4040 is FDA – 21 CFR 177.2550; Food and Drug Administration Compliant.DOW FilmTec vs DuPont FilmTec & Membrane Compatibility Notes: DowDuPont merger was completed in 2017 and FilmTec Corporation was moved to DuPont.

    DOW FILMTEC SW30 elements may also be operated at lower pressure to reduce pump size, cost, and operating expensesDuPont (formerly DOW) FILMTEC SW30-4040 is FDA – 21 CFR 177.2550; Food and Drug Administration Compliant.DOW FilmTec vs DuPont FilmTec & Membrane Compatibility Notes: DowDuPont merger was completed in 2017 and FilmTec Corporation was moved to DuPont.

    4m³/h) pH Range, Continuous Operation*:2-11pH Range, Short-Term Cleaning**:1-13Maximum Feed Silt Density Index:SDI 5Fere Clorine Tolerance***: The factory-recommended replacement is SW30-4040.Commonly used in on-board Watermakers to create drinking water from seawater for yachts, boats, and cruise ships, DOW FILMTEC marine SWRO elements offer the highest productivity while maintaining excellent salt rejection. DuPont FILMTEC SW30-4040 Seawater RO Elements for Watermakers and Marine Systems (Replaces SW30HRLE-4040)DuPont DOW FILMTEC SW30-4040 elements have one of the highest flow rates available to meet the water demands of both sea-based and land-based desalinators.

  • Health & Beauty
    • DOW FILMTEC SW30 elements may also be operated at lower pressure to reduce pump size, cost, and operating expensesDuPont (formerly DOW) FILMTEC SW30-4040 is FDA – 21 CFR 177.2550; Food and Drug Administration Compliant.DOW FilmTec vs DuPont FilmTec & Membrane Compatibility Notes: DowDuPont merger was completed in 2017 and FilmTec Corporation was moved to DuPont.

    DOW FILMTEC SW30 elements may also be operated at lower pressure to reduce pump size, cost, and operating expensesDuPont (formerly DOW) FILMTEC SW30-4040 is FDA – 21 CFR 177.2550; Food and Drug Administration Compliant.DOW FilmTec vs DuPont FilmTec & Membrane Compatibility Notes: DowDuPont merger was completed in 2017 and FilmTec Corporation was moved to DuPont.

    FilmTecMembrane SW30HRLE-4040 (255048) was discontinued by DuPont in 2022.4%Exterior:Hard Shell FiberglassMembrane Type:Polyamide Thin-Film CompositePermeate flow and salt rejection based: 32,000 ppm NaCl feed stream, 77°F, 8% recovery, 800 psig.

  • Health & Beauty