4 X 40 Ultrafiltration Membrane , Polyethersulfone (pes) Uf , 10,000 Mwco

0002" (1/15th the size of a human hair).FDA Listed Materials - All materials meet U. Food & Drug Administration requirements for food & beverage contact.

5"Filter Length:20"Material:Melt-Blown PolypropyleneFor Filter Housing:20" Standard Single or Multi-Cartridge Filter Housings, Including:Pentek, Pentair, American Plumb, US FilterEden EFC, EFCS seriesHarmsco BC4-2, BC6-2Shelco FOS2 SeriesCan Replace Cartridges:Tier1 P20-20, SDC-2525-20, SDF-25-2020, MB25200-20, PX20-20, P25-20, 155226-43Features and Benefits of AMI Melt-Blown Polypropylene Water Filters:Graded Pore Structure for Enhanced Dirt-Holding Capacity and Extended LifeHigh Consistency Melt Blow PolypropyleneFree of Surfactants, Binders and AdhesivesProtect downstream equipment and appliancesRemoves dirt, rust, sand, grit, and other suspended solids from waterEasy and safe cartridge incineration and disposalIdeal for use as pre-treatment to an RO SystemCommon Applications for 10 Micron Melt-Blown Polyproyplene Depth Filters:Whole-House FiltrationCommercial FiltrationPre-Treatment for Commercial Point of Entry (POE) FiltrationCommercial RO PretreatmentMulti-Cartridge Filter HousingsLaboratoriesInstitutionsCommercialManufacturingRinse WaterWaste WaterSurface WaterSeawaterAnd a wide variety of other applications 20" Sediment Water Filter | 20 Micron Filtration Rating | Melt-blown Polypropylene Depth Filter The universal 20" standard size can be used in most single-cartridge or multi-cartridge filters housings designed for standard 20 inch filters, making AMI filters an ideal high quality and economical replacement for your water filter installation.AMI sediment filters can be used as pretreatment commercial RO systems or as a stand-alone whole house or commercial filter to protect piping and appliances from damage and buildup of dirt..AMI H-F2020CF SpecificationsAMI Part #:H-F2020CFNominal Size:20" StandardFiltration Rating:20μ (20 Microns)Filter Diameter"2.

AMI H-F3020CF SpecificationsAMI Part #:H-F3020CFNominal Size:30" StandardFiltration Rating:20μ (20 Microns)Filter Diameter"2.AMI 30" Sediment filters can be used in any filter housing designed to accept 30" standard filter cartridges.30" Sediment Water Filter | 20 Micron Filtration Rating | Melt-blown Polypropylene Depth Filter 20 Micron Sediment Filter Cartridge for Water Filtration30-Inch Water Filter for Sediment RemovalAMI 20 Micron Sediment Filters remove dirt, sand, rust, grit, and other suspended matter from water.5"Filter Length:30"Material:Spun PolypropyleneFor Filter Housing:30" Standard SIngle or Multi-Cartridge Filter Housings, Including:Shelco FOS3 SeriesAMI SS Filter HousingsEden EFC and EDEN EFCS seriesHarmsco BC4-3-T-EP, BC6-3-T-EP Pentek ST-3, ST-BC12Can Replace Cartridges:SDC-25-3020, SDF-25-3020Features and Benefits of AMI Melt-Blown Polypropylene Water Filters:Graded Pore Structure for Enhanced Dirt-Holding Capacity and Extended LifeHigh Consistency Melt Blow PolypropyleneFree of Surfactants, Binders and AdhesivesProtect downstream equipment and appliancesRemoves dirt, rust, sand, grit, and other suspended solids from waterEasy and safe cartridge incineration and disposalIdeal for use as pre-treatment to an RO SystemCommon Applications for 20 Micron Melt-Blown Polyproyplene Water Filters:Whole-House FiltrationCommercial FiltrationPre-Treatment for Commercial Point of Entry (POE) FiltrationCommercial RO PretreatmentMulti-Cartridge Filter HousingsLaboratoriesInstitutionsCommercialManufacturingRinse WaterWaste WaterSurface WaterSeawaterAnd a wide variety of other applications.

AMI 30" Sediment filters can be used in any filter housing designed to accept 30" standard filter cartridges.5"Filter Length:30"Material:Spun PolypropyleneFor Filter Housing:30" Standard SIngle or Multi-Cartridge Filter Housings, Including:Shelco FOS3 SeriesAMI SS Filter HousingsEden EFC and EDEN EFCS seriesHarmsco BC4-3-T-EP, BC6-3-T-EP Pentek ST-3, ST-BC12Can Replace Cartridges:SDC-25-3001, SDF-25-3001, Features and Benefits of AMI Melt-Blown Polypropylene Water Filters:Graded Pore Structure for Enhanced Dirt-Holding Capacity and Extended LifeHigh Consistency Melt Blow PolypropyleneFree of Surfactants, Binders and AdhesivesProtect downstream equipment and appliancesRemoves dirt, rust, sand, grit, and other suspended solids from waterEasy and safe cartridge incineration and disposalIdeal for use as pre-treatment to an RO SystemCommon Applications for 1 Micron Melt-Blown Polyproyplene Water Filters:Whole-House FiltrationFine Sediment FiltrationCommercial FiltrationPre-Treatment for Commercial Point of Entry (POE) FiltrationCommercial RO PretreatmentMulti-Cartridge Filter HousingsLaboratoriesInstitutionsCommercialManufacturingRinse WaterWaste WaterSurface WaterSeawaterAnd a wide variety of other applications.

O.Max.

0 In. 12 Gallon Per Day Home Ro Membrane | Ami Membranes With hundreds of thousands of membranes in operation in water filtration systems world-wide, AMI membranes have earned a reputation of delivering consistent, high quality which makes AMI Membranes the natural choice for use in home or office RO systems.. (3.

Country of Manufacture:United States (USA)Applications for Polyethersulfone Ultrafiltration Membrane Elements:Absolute bacteria and virus removal from surface waters, beverage and liquid food processing and byproduct streams Applications requiring tolerance to solvents Treatment of oil, food, and pharmaceutical streams that require resistance to many esters and aromatics Recovery of proteins, gelatin, enzymes, whey proteinPhysical Dimensions of M-U4040PES:Total Length (L):40 In.

x 26"LFlow Rate:300 GPD (1,135 LPD)Applied Pressure:150 psi (1 MPa)Stabilized Salt Rejection:99%For Housing:Standard 2" x 26"Outer Wrap:Tape WrappedMembrane Type:Tap or Brackish WaterMembrane Sheet:TFC (Thin Film Composite)Element Type:Spiral WoundFeed Water Test Temperature:77°F (25°C)Single Element Recovery:10%Chlorine Tolerance:0Feed water pH Range:2-11For Housing:2" x 26"Manufacturer:Applied Membranes, Inc.

75 In.9 cm)Replacement Compatibility for AMI 4 X 40 UF MEMBRANESApplied Membranes M-U4040PES membrane elements fit industry-standard 4x40 membrane housings and can be used as direct replacement for many industry-standard 4x40 size spiral wound polyethersulfone ultrafiltration elements with 3/4" male product water tubes ("stinger style").

8 In. This will lead to premature fouling of the membrane resulting in drop in permeate flow and higher TDS of the permeate.