(29.85 cm)Membrane Length (I):10.0 In. (25.4 cm)Diameter (D):1.5 In. Element permeate flow may vary ± 15%.*Salt Rejection shown is from internal test data.Features of AMI Home RO MembranesRemove up to 99% of total dissolved solids from water.High Rejection and Reliable Flow RatesMade in the USAManufactured in our ISO 9001:2015 Certified Facilities100% Performance and Quality TestedBacked by our Experienced Technical Support StaffHigh Quality for Consistent and Reliable PerformanceUses the most advanced membrane film technology and manufacturing processesStandard dimensions to fit in commonly available housingsCertified to NSF/ANSI 58 for the reduction of Arsenic, Barium, Cadmium, Chromium (Hexavalent), Chromium (Trivalent), Copper, Turbidity, Fluoride, Lead, Radium 226/228, Selenium, and TDS.Applications for AMI Home RO MembranesIn the Home for Drinking, Cooking, Pets, and PlantsOfficesAquariumsInstitutionsRestaurantsIce MakersLabsUnder the Counter/Under the Sink ROPoint of use RO SystemsPhysical Dimensions of M-T1512A12:Total Length (L):11.75 In. With hundreds of thousands of membranes in operation in water filtration systems world-wide, AMI membranes have earned a reputation of delivering consistent, high quality which makes AMI Membranes the natural choice for use in home or office RO systems. AMI 12 GPD Reverse Osmosis Membrane for Home RO SystemsAMI home RO membrane elements are among the finest in the industry. (3.81 cm) AMI Home RO Membranes are constructed of tap water TFC (thin film composite) membrane material and fit standard residential home RO Housings for point of use systems.AMI Membranes are Made in the USA in their ISO 9001:2015 Certified Facility and are 100% Quality and Performance Tested.M-T1512A12 is certified to NSF/ANSI 58 for the reduction of Arsenic, Barium, Cadmium, Chromium (Hexavalent), Chromium (Trivalent), Copper, Turbidity, Fluoride, Lead, Radium 226/228, Selenium, and TDS.Specifications for M-T1512A12AMI Part Number:M-T1512A12Flow Rate:12 GPD (757 LPD)Membrane Type:TFC (Thin Film Composite)Minimum Salt Rejection:96%*Stabilized Salt Rejection:98%*For Housing:Standard Residential 2" x 12"Replacement for Systems:AAA-125, AAA-125P, AAA-126UVSince the presence of free chlorine and other oxidizing agents will cause premature membrane failure, a carbon block filter should be used before this RO membrane element when filtering chlorinated water.Performance specifications based on 500 ppm tap water, 50 psi (0.35 MPa) applied pressure, 77°F (25°C) feed water temperature, feed water pH 7-8 and 15% recovery.
469
12 Gallon Per Day Home Ro Membrane , Ami Membranes
Specifications of 12 Gallon Per Day Home Ro Membrane , Ami Membranes | |
---|---|
Category | Health & Beauty |
Instock | instock |