reorder
health-food.mybogy.online
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Health & Beauty

4 X 40 , 2,860 Gpd At 100 Psi , Frp Wrapped , Extra-low Energy Commercial Ro Membrane , Applied Membranes

About The M-B4040AXLE SpecificationsAMI Part Number:M-B4040AXLEMembrane Size (Nominal):4 x 40Membrane Dimensions:3. (1. AMI XLE BWRO elements are wrapped in a hard shell of FRP for added strength and to withstand higher pressure drops.9"Dia

AMI Commercial XLE Reverse Osmosis Membranes are constructed of tap water TFC (thin film composite) membrane material and fit standard PVC and Stainless Steel RO Membrane Housings. product manuals or literature associated with your system, and photographs of your system or membranes. Our certified water treatment experts will be happy to discuss your application. To ensure prompt and accurate information, please include as much information about your system as possible, such as: model, manufacturer, model of membranes being replaced, any available. (101.6 cm)Membrane Length (I):38 In. x 40"LFlow Rate:2,860 GPD (10,825 LPD)Applied Pressure:100 psi (0.7 MPa)Stabilized Salt Rejection:99%Outer Wrap:Fiberglassed ShellMembrane Sheet:TFC (Thin Film Composite)Element Type:Spiral WoundFor Housing:Standard 4" x 40"Feed Water Test Temperature:77°F (25°C)Single Element Recovery:15%Chlorine Tolerance:0Feed water pH Range:2-11Manufacturer:Applied Membranes, Inc.Country of Manufacture:United States (USA)Can Replace:CSM RE4040-BLFNote: Performance specifications based on 500 mg/l sodium chloride, 100 psi (1 MPa) applied pressure, 77ºF (25ºC) feed water temperature, pH 8 and the recovery listed in the table above. (1.9 cmm)Replacement Compatibility for AMI 4 X 40 XLE RO MEMBRANESApplied Membranes M-B4040AXLE FRP wrapped extra-low-energy membrane elements can be used as direct replacement for many industry-standard ultralow pressure 4x40 size RO elements with 3/4" male product water tubes ("stinger style") which are rated at 100psi - including CSM RE4040-BLF.If you wish to learn more about compatibility, please contact us. By using these elements in your commercial reverse osmosis system, you can significantly reduce your operating costs in tap water applications. Element permeate flow may vary ± 20%.Features of AMI Brackish Water RO MembranesReduce operating costs and wear and tear on your system by running your system at a lower pressure.High Rejection & Flow RateHard fiberglass exterior provides added strength and withstands higher pressure drops than tape-wrapped elements.Made in the USAManufactured in our ISO 9001:2015 Certified Facilities100% Performance and Quality TestedBacked by our Experienced Technical Support StaffHigh Quality for Consistent and Reliable PerformanceUses the most advanced membrane film technology and manufacturing processesStandard dimensions to fit in commonly available housingsApplications for AMI Commercial BWRO MembranesRestaurantsAquariumsWhole House (Residential)OfficeInstitutionsHotelsHospitalsDisaster ReliefSpot Free Rinse/Car WashLabsPharmaceuticalHumidificationMistingManufacturingRinse WaterBottled WaterWater storesBeverageFood ProcessingIce MakersCommercial Water TreatmentIce MakersTap WaterBrackish WaterWide Variety of Other ApplicationsPhysical Dimensions of M-B4040AXLE:Total Length (L):40 In. (96 cm)Diameter (D):3.9 In. With hundreds of thousands of membranes in operation in water filtration systems world-wide, AMI membranes have earned a reputation of delivering consistent, reliable, and long lasting performance, making AMI Membranes the natural choice for use in commercial RO systems. (9.9 cm)PWT (P):0.75 In. AMI extra-low energy brackish water RO membrane elements produce high quality water from tap or brackish water sources in commercial RO systems, and are among the finest in the industry. AMI Membranes are Made in the USA in their ISO 9001:2015 Certified Facility and are 100% Quality and Performance Tested.M-B4040AXLE SpecificationsAMI Part Number:M-B4040AXLEMembrane Size (Nominal):4 x 40Membrane Dimensions:3.9"Dia. AMI XLE BWRO elements are wrapped in a hard shell of FRP for added strength and to withstand higher pressure drops. 4" x 40" Extra-Low Energy Brackish Water RO Membrane , Fiberglasssed Shell , 2,860 GPD BWRO XLEApplied Membranes XLE Extra-Low Energy (Ultra-Low Pressure) RO Membrane elements are specially designed to run at 100 psi while producing the same product flow as standard elements.

469

4 X 40 , 2,860 Gpd At 100 Psi , Frp Wrapped , Extra-low Energy Commercial Ro Membrane , Applied Membranes

469

Specifications of 4 X 40 , 2,860 Gpd At 100 Psi , Frp Wrapped , Extra-low Energy Commercial Ro Membrane , Applied Membranes

CategoryHealth & Beauty
Instockinstock

Last Updated

4 X 40 , 2,860 Gpd  At 100 Psi , Frp Wrapped , Extra-low Energy Commercial Ro Membrane , Applied Membranes
More Varieties

4 X 40 , 2,860 Gpd  At 100 Psi , Frp Wrapped , Extra-low Energy Commercial Ro Membrane , Applied Membranes
4 X 40 , 2,860 Gpd  At 100 Psi , Frp Wrapped , Extra-low Energy Commercial Ro Membrane , Applied Membranes
4 X 40 , 2,860 Gpd  At 100 Psi , Frp Wrapped , Extra-low Energy Commercial Ro Membrane , Applied Membranes
4 X 40 , 2,860 Gpd  At 100 Psi , Frp Wrapped , Extra-low Energy Commercial Ro Membrane , Applied Membranes
4 X 40 , 2,860 Gpd  At 100 Psi , Frp Wrapped , Extra-low Energy Commercial Ro Membrane , Applied Membranes
4 X 40 , 2,860 Gpd  At 100 Psi , Frp Wrapped , Extra-low Energy Commercial Ro Membrane , Applied Membranes
Rating :- 9.29 /10
Votes :- 12