Install the filter at your home's point-of-entry water line. Includes a step-by-step installation and maintenance guide.Contaminants RemovedChemical Contaminants Removed: Bad Tastes & Odors, Chlorine, Chlorine By-Products, Chloramine, Pesticides, Herbicides, Insecticides, Industrial Solvents, Volatile Organic Chemicals (VOCs)Sediment Contaminants Removed: Sediment, Dirt, Rust, Sand, Silt, and other suspended solids which can cause build-up and clogging.

High Rejection & Flow RateMade in the USAManufactured in our ISO 9001:2015 Certified Facilities100% Performance and Quality TestedBacked by our Experienced Technical Support StaffHigh Quality for Consistent and Reliable PerformanceUses the most advanced membrane film technology and manufacturing processesStandard dimensions to fit in commonly available housingsApplications for AMI Home RO MembranesIn the Home for Drinking, Cooking, Pets, and PlantsOfficesAquariumsInstitutionsRestaurantsIce MakersLabsUnder the Counter/Under the Sink ROPoint of use RO SystemsDimensions of M-T1812A200 Home RO MembraneTotal Length (L):11. AMI 200 GPD Residential Membrane for Home RO Systems AMI 200GPD residential RO membrane elements are among the finest in the industry.With hundreds of thousands of membranes in operation world-wide, AMI membranes have earned a reputation of delivering consistent, high quality which makes AMI Membranes the natural choice for use in home or office RO systems.

2. This will lead to premature fouling of the membrane resulting in drop in permeate flow and higher TDS of the permeate. With hundreds of thousands of membranes in operation in water filtration systems world-wide, AMI membranes have earned a reputation of delivering consistent, reliable, and long lasting performance, making AMI Membranes the natural choice for use in small commercial RO systems.

.1200 Gallon Per Day Wall Mount Ro System | 220v 60hz 1,200 GPD Commercial Wall-Mount Reverse Osmosis SystemDesigned to produce low dissolved solids water from tap or well water, these space-saving wall-mount RO systems use high efficiency reverse osmosis membranes.

5" Diameter x 12" LengthVolume of Media:35.5 GPMMax Service Life: 1 YearSelf-Contained Inline filter design requires no filter housing.5 cu.

9 cm)PWT (P):0.

6%Minimum Salt Rejection:99. Permeate flows for individual elements may vary +/- 20%.FilmTec BW30-4040Hydranautics CPA2-4040Hydranautics CPA5-LD-4040Toray TM710Specifications for LG BW 4040 RLG Chem Product:LG BW 4040 RSize (Approximate):4" Dia.

4m³/h) pH Range, Continuous Operation:2-11pH Range, Short-Term Cleaning:1-13Maximum Feed Silt Density Index:SDI 5Free Chlorine Tolerance:0Related Products for use with M-SR2724020333 Seawater ElementsC-C2510-A11Membrane Cleaning Cartridge with Acid Cleaner to Remove Scale Buildup and Prolong Membrane LifeC-C2510-A22Membrane Cleaning Cartridge with Alkaline Cleaner to Remove Organics and Prolong Membrane LifeC-C2510-A88Membrane Preservative Cartridge for Preserving the System and Membrane During Extended Periods of Non-Operation.

(60 cm)Diameter (D):1. 2” X 26” | 300 Gpd | 150 Psi | Low Energy Ro Membrane | Applied Membranes.

Features of AMI Home RO MembranesRemove up to 99% of total dissolved solids from water.

5"Filter Length:30"Material:Spun PolypropyleneFor Filter Housing:30" Standard SIngle or Multi-Cartridge Filter Housings, Including:Shelco FOS3 SeriesAMI SS Filter HousingsEden EFC and EDEN EFCS seriesHarmsco BC4-3-T-EP, BC6-3-T-EP Pentek ST-3, ST-BC12Can Replace Cartridges:SDC-25-3001, SDF-25-3001, Features and Benefits of AMI Melt-Blown Polypropylene Water Filters:Graded Pore Structure for Enhanced Dirt-Holding Capacity and Extended LifeHigh Consistency Melt Blow PolypropyleneFree of Surfactants, Binders and AdhesivesProtect downstream equipment and appliancesRemoves dirt, rust, sand, grit, and other suspended solids from waterEasy and safe cartridge incineration and disposalIdeal for use as pre-treatment to an RO SystemCommon Applications for 1 Micron Melt-Blown Polyproyplene Water Filters:Whole-House FiltrationFine Sediment FiltrationCommercial FiltrationPre-Treatment for Commercial Point of Entry (POE) FiltrationCommercial RO PretreatmentMulti-Cartridge Filter HousingsLaboratoriesInstitutionsCommercialManufacturingRinse WaterWaste WaterSurface WaterSeawaterAnd a wide variety of other applications.AMI 30" Sediment filters can be used in any filter housing designed to accept 30" standard filter cartridges.

.

5" OD x 22" H).

AMI AAA-RO-200 Home RO Drinking Water System Water Filter 5 Stage | Extra-High Flow 200 Gallons Per Day (200 GPD)Under-the-Counter (Under Sink) Ultra-High Flow Home Reverse Osmosis Drinking Water SystemsAMI Home water treatment systems deliver high quality pure water that tastes better than bottled right from your sink..System can be used to supply filtered water to a refrigerator ice-maker/water-dispenser by inserting a branch tee fitting (sold separately) between the post filter and the faucet.

655139-03Oil Absorbing Filter Cartridge - Oil-Water Separator Replacement Cartridge, 20" Big Blue Pentair Pentek FilterH-F10100CFPlankton Filter - 10" Standard 100 Micron Spun Polypropylene Replacement Filter Cartridge x 21"LFlow Rate:300 gpd (1.5x21 Seawater RO ElementsFor Use in Systems:Watermakers or marine systems using 2.

)Changeout Differential Pressure:35 psid (2.

S.125" ID x 9.)Changeout Differential Pressure:35 psid (2.

. Particulate ­filtration is used to intercept insoluble lead-containing particles.75" OD x 9.No release of carbon fines: Extruded carbon filters do not release activated carbon particles ("gray water") during startup or operation.

(6.

6%Minimize Salt Rejection:99.5x38 Seawater Desalination Reverse Osmosis Membrane AquaPro Replacement For Replacement in Village Marine LIttle Wonder 200 Watermaker Systems by Parker RacorAdd AMI Membrane Quality to your Existing Seawater Desalination EquipmentAMI 2. View our Watermaker Replacement Membrane Chart.

5" x 40"Feed Water Test Temperature:77°F (25°C)Single Element Recovery:15%Chlorine Tolerance:0Feed water pH Range:2-11Manufacturer:Applied Membranes, Inc.

AMI NF Membranes are Made in the USA in their ISO 9001:2015 Certified Facility and are 100% Quality and Performance Tested.Features of Applied Membranes Nanofiltration Membranes:90% Average Ion Rejection>97% Hardness RejectionHigh flux results in high yieldsLow energy usage reduces power consumption and costDurable with good cleanability for long element lifeMade in the USAManufactured in our ISO 9001:2015 Certified Facilities100% Performance and Quality TestedBacked by our Experienced Technical Support StaffHigh Quality for Consistent and Reliable PerformanceUses the most advanced membrane film technology and manufacturing processesStandard dimensions to fit in commonly available housings M-N4040A9 SpecificationsAMI Part Number:M-N4040A9Membrane Size (Nominal):4x40Membrane Dimensions:3.

9 In.

The high-performance carbon filter removes up to >90% of chlorine and chloramine from the water.

Country of Manufacture:United States (USA)Applications for Polyethersulfone Ultrafiltration Membrane Elements:Absolute bacteria and virus removal from surface waters, beverage and liquid food processing and byproduct streams Applications requiring tolerance to solvents Treatment of oil, food, and pharmaceutical streams that require resistance to many esters and aromatics Recovery of proteins, gelatin, enzymes, whey proteinPhysical Dimensions of M-U4040PES:Total Length (L):40 In.9 In.

O.

AMI H-F3020CF SpecificationsAMI Part #:H-F3020CFNominal Size:30" StandardFiltration Rating:20μ (20 Microns)Filter Diameter"2. AMI sediment filters can be used as pretreatment commercial RO systems or as a stand-alone commercial filter to protect piping and appliances from damage and buildup of dirt.30" Sediment Water Filter | 20 Micron Filtration Rating | Melt-blown Polypropylene Depth Filter 20 Micron Sediment Filter Cartridge for Water Filtration30-Inch Water Filter for Sediment RemovalAMI 20 Micron Sediment Filters remove dirt, sand, rust, grit, and other suspended matter from water.AMI 30" Sediment filters can be used in any filter housing designed to accept 30" standard filter cartridges.

5 Micron Sediment Filter for 20" Big Blue HousingRemoves Dirt, Rust, Sand, Silt, and Other Suspended Solids From the WaterApplied Membranes melt-blown polypropylene sediment filters remove dirt, rust, sand, silt, and other suspended solids from the water to protect downstream plumbing, fixtures, and equipment from damage due to sediment buildup.Longest Life - Graded pores maximize dirt-holding capacity using the entire depth of the filter..

3 cm)Membrane Length (I):19 In. To ensure prompt and accurate information, please include as much information about your system as possible, such as: model, manufacturer, model of membranes being replaced, any available.9 cm)PWT (P):0. product manuals or literature associated with your system, and photographs of your system or membranes.

5% Single Element Recovery: 15% Exterior: Hard Shell Fiberglass Membrane Type: Polyamide Thin-Film CompositePermeate flow and salt rejection based: 2,000 ppm NaCl feed stream, 77°F, pH 8, 15% recovery, 225 psig. DuPont FILMTEC™ BW30 PRO-2540 Brackish Water Reverse Osmosis Membrane Element (Direct Replacement for DOW FilmTec BW30-2540) FILMTEC BW30 PRO-2540 Elements are an industry standard for reliable operation and production of high quality water.